Innovation and Technology

Since the MI’s inaugural DEI benchmarking survey, conducted in partnership with Keybridge and released in October 2021, manufacturers have taken active steps to improve DEI in the workplace. The MI has recently surveyed manufacturers again to highlight current practices and attitudes around DEI in our new DEI Benchmarking in Manufacturing Report. Our updated survey lays out how manufacturing employers are approaching their companies’ initiatives in new ways. The report provides helpful information on the state of DEI in the manufacturing industry and recommendations for employers to use as they improve on progress made over the last two years. Check it out here.

KEY TAKEAWAYS:

• 72% of manufacturers agreed that improving and maintaining DEI was a key focus for their company – and many of them have been taking tangible steps towards that goal.
• More than 60% of respondents reported that the representation of women within their companies has increased in the past 5 years.

To learn how sectors and businesses are using artificial intelligence, The Economist (subscription) created an index of firms in the S&P 500—and the results show that “even beyond tech firms the interest in AI is growing fast.”

What’s going on: “We looked at five measures: the share of issued patents that mention AI; venture-capital (VA) activity targeting AI firms; acquisitions of AI firms; job listings citing AI; and mentions of the technology on earnings calls. … [C]lear leaders and laggards are already emerging.”

The findings: In the past three years, approximately two-thirds of the companies examined by The Economist have placed a job ad that refers to AI. One of the sharpest increases in such mentions has been among chipmakers.

• The number of registered AI-related patents rose between 2020 and 2022.
• This year, about 25% of venture deals by S&P 500 companies involved AI start-ups, an increase from 19% just two years ago.

Outside Silicon Valley: While the index found that the most “enthusiastic” users of AI are technology companies, “[b]eyond tech, two types of firms seem to be adopting AI the quickest.”

• Data-heavy sectors, including insurance, pharmaceutical and financial-services companies “account for about a quarter of our top 100.” In this category, Abbott is building AI-powered medical tools.
• The other category of company quickly adopting AI includes “industries that are already being disrupted by technology,” such as automakers, telecom, retail and media. Among these are Ford and General Motors, which are using AI in electric-vehicle manufacturing.

The last word: AI use may have some drawbacks, including cybersecurity risks, potential legal liability and possible inaccuracy of results. However, these “must be weighed against the potential benefits, which could be vast.”

With the backing of major HVAC manufacturers, start-ups are working to make air conditioners that are capable of easing the strain on the power grid, according to The Wall Street Journal (subscription).

What’s going on: “Companies such as Blue Frontier, Transaera and Montana Technologies are raising money from investors including industry giant Carrier Global … to develop more efficient technologies. Many of those efforts focus on the humidity rather than the heat, using new materials like liquid salt to dry out the air.”

Why it’s important: The number of air conditioners in use worldwide is expected to more than double by the middle of the century, to 5.5 billion, with many units likely to be inefficient.

• “Stalwarts such as Carrier and Trane Technologies say they are spending billions of dollars to offer more efficient versions of conventional ACs while evaluating the new approaches.”

A different AC unit: Traditional air-conditioning units work by converting refrigerants from gas to liquid and then back again, while circulating air with fans. They are unable to remove humidity without cooling the air, which is what makes them inefficient, according to the article.   

• “Blue Frontier aims to separate humidity and temperature control using a liquid salt solution that was developed with the National Renewable Energy Laboratory. The solution also stores energy, reducing consumption at peak times, when electricity grids are strained on hot days.
• Innovation is also required to make air conditioning affordable for people in developing nations, according to the Journal.

More investment: “The need for new approaches is pushing Carrier to make venture investments to complement its other growth strategies, said Jennifer Anderson, Carrier’s chief sustainability officer. Trane is investing in startups like data-center-cooling company LiquidStack while looking at new technology approaches, CEO Dave Regnery said.”

The Creators Wanted tour landed in Atlanta last week for the SkillsUSA National Leadership and Skills Conference—the largest gathering of the America’s future skills workforce.

Over the course of the three-day program, the tour, an initiative of the NAM and the Manufacturing Institute, helped change attitudes and challenge misconceptions about manufacturing, opening up a new world for some of the country’s most talented rising workers.

By the numbers: The tour’s SkillsUSA stop, sponsored by Honda, Snap-on, FactoryFix and Union Pacific, helped share the story of modern manufacturing with many of the brightest career mentors and technical education students in the United States.

• 15,000 people attended the event, including many career and technical education students, educators and parents.
• More than 1,500 people took part in the Creators Wanted immersive experience at SkillsUSA.
• More than 120,000 students and career mentors signed up to learn more about modern manufacturing careers during the tour stop in Georgia.

More participants: Other leading manufacturers were also in attendance, engaging students with information about careers in manufacturing. A few of the participants included Caterpillar, John Deere/Korematsu, Volvo NA Group, Vermeer Corp., Toyota, Cummins, Penske and 3M.

A special guest: Snap-on Chairman and CEO Nick Pinchuk dedicated a full day to inspiring students and educators. The NAM executive committee member and Manufacturing Institute board member emphasized the “Creators Wanted” mantra in order to remind participants that manufacturers aren’t just recruiting workers—they’re inspiring and empowering creators. 

Local coverage: The visit made waves in Georgia, where it was covered on Fox 5’s Good Day Atlanta:

• “A huge turnout down here,” said Fox 5’s Paul Milliken, who had multiple live hits at the Creators Wanted immersive experience. “These students are so talented, so incredible … the future of America’s skilled workforce.”
• “This conference—it’s just a really incredible opportunity for these future workforce leaders to come together, meet each other, network and compete.”

WATCH: @GoodDayAtlanta's @PaulFromFox5 reports on #CreatorsWanted traveling to @GWCC_ATL for @SkillsUSA #NLSC23. Check out how we are working to inspire students to consider rewarding careers in modern manufacturing. https://t.co/0GAlhxDmTb pic.twitter.com/BFJeKyXS9G

— The NAM (@ShopFloorNAM) June 20, 2023

Overheard at the event: Plenty of participants shared their excitement, emphasizing opportunities to connect with employers, learn about new skills and find paths to future careers.

• “These are viable careers. They are jobs that you can make quite a bit of money right from the beginning, and at the same time you’re learning core skills that you can carry on for the rest of your life.”
• “We’ve got tons of jobs out there across the U.S. Everybody is looking for talented individuals.”
• “You can explore … different careers that you want to do, [to] help you become a more successful adult in the future.”

The big picture: Over the course of the Creators Wanted Tour, which launched a year and eight months ago:

• 4 million students and career mentors have signed up online to learn more about modern manufacturing careers.
• Over 10,000 students and more than 3,000 career mentors have participated in our immersive experience, with 84% reporting a significantly improved view of modern manufacturing careers.
• The tour has received $5.35 million in positive earned media and 150 million digital impressions. 

Making an impact: “Interacting with the students, educators and caregivers, we could truly feel the impact we’re making,” said Chrys Kefalas, managing vice president of brand strategy at the NAM. “This isn’t just about changing minds—we’re creating dreams and altering life trajectories.”

What’s next: The tour keeps on rolling this fall to Minneapolis and St. Paul, Minnesota, and Circleville, Ohio. You can also keep an eye out for new online resources that are coming out this summer, or browse the more than 330,000 open manufacturing jobs and 150,000 training programs listed online.

The Creators Wanted tour landed in Atlanta last week for the SkillsUSA National Leadership and Skills Conference—the largest gathering of the America’s future skills workforce.

Over the course of the three-day program, the tour, an initiative of the NAM and the Manufacturing Institute, helped change attitudes and challenge misconceptions about manufacturing, opening up a new world for some of the country’s most talented rising workers.

By the numbers: The tour’s SkillsUSA stop, sponsored by Honda, Snap-on, FactoryFix and Union Pacific, helped share the story of modern manufacturing with many of the brightest career mentors and technical education students in the United States.

• 15,000 people attended the event, including many career and technical education students, educators and parents.
• More than 1,500 people took part in the Creators Wanted immersive experience at SkillsUSA.
• More than 120,000 students and career mentors signed up to learn more about modern manufacturing careers during the tour stop in Georgia.

More participants: Other leading manufacturers were also in attendance, engaging students with information about careers in manufacturing. A few of the participants included Caterpillar, John Deere/Korematsu, Volvo NA Group, Vermeer Corp., Toyota, Cummins, Penske and 3M.

A special guest: Snap-on Chairman and CEO Nick Pinchuk dedicated a full day to inspiring students and educators. The NAM executive committee member and Manufacturing Institute board member emphasized the “Creators Wanted” mantra in order to remind participants that manufacturers aren’t just recruiting workers—they’re inspiring and empowering creators.

Read the full story here.

When Mary Andringa arrived at NAM headquarters on Wednesday, she expected a tour of the renovated office. Instead, the former NAM Board chair was surprised by an applauding crowd who gathered for the ribbon-cutting for one of the NAM’s meeting rooms, now named the Mary Andringa Room in commemoration of her decades-long service to manufacturers in the U.S. The NAM’s conference rooms are named for many luminaries of manufacturing, including Andrew Carnegie, Thomas Edison, the Wright Brothers, Jonas Salk and Marie Curie.

“I was absolutely overwhelmed, humbled and honored,” Andringa said. 

A longtime supporter: Now chair emeritus of Vermeer Corporation—a family-owned, midsized manufacturer of industrial and agricultural machines in Pella, Iowa—Andringa served as NAM Board chair from 2011 to 2013 and has been an active participant on the NAM Board since the early 2000s.

• Andringa found her experience as NAM Board chair deeply meaningful, remarking on the close relationship she developed with NAM President and CEO Jay Timmons, who was also newly appointed in 2011.
• “It was a really great experience because I had a few years under my belt as CEO [of Vermeer],” Andringa said, “and I could share best practices with Jay. It was great to see how he took initiative and dug into some areas that needed more cooperation, like the NAM’s partnerships with state associations.”

Visiting the Hill: Andringa said she “enjoyed being a voice for manufacturing” in meetings on the Hill and with several administrations.

• Whether advocating against compliance regulations that created needless hardship for manufacturers, or for removing trade barriers impeding U.S. exports, Andringa stressed that she always made her case to policymakers on both sides of the aisle.
• “The NAM tries to be the voice of reason. … It has done a good job connecting with both parties and whoever is in the White House,” she said.
• She always felt that policymakers listened to her and took her opinions seriously, recognizing that her privately held, medium-sized company was “what America is all about.”

Workforce, workforce, workforce: The importance of training more skilled workers has remained constant throughout Andringa’s career as a manufacturer and advocate for manufacturing.

• One of the highlights of her time at the NAM, she said, was seeing the rise of the Manufacturing Institute, the NAM’s 501(c)3 workforce development and education affiliate, on whose board she now serves.
• Andringa is impressed particularly with the MI’s stellar outreach, which includes webinars that help manufacturers recruit workers from populations they might not be familiar with, such as people with criminal records.

Her story: Andringa understands the importance of workforce education and training firsthand, having worked as a teacher before joining her family’s company back in 1982.

• After starting out at Vermeer in human resources, then moving to the advertising department, she became deeply involved in manufacturing operations.
• Looking back at her years as COO, then co-CEO with her brother and finally solo CEO, she is proudest of two accomplishments: championing lean manufacturing, which the company has now practiced for 25 years, and working with her family members to create a solid governance structure to avoid the difficult leadership transitions family firms often face.
• And to take things full circle, Andringa also exercised her commitment to education at Vermeer, ensuring that its team members have many opportunities for training and advancement.

Lasting ties: Andringa has many fond memories of her work with the NAM, including the time in 2008 where she and other NAM representatives unexpectedly found themselves talking with President George W. Bush.

• She recalls that Timmons encouraged her to talk to the press afterward, which taught her an important lesson: that you must always come prepared with a short pitch that will get your story across quickly, because storytelling is all-important.

The last word: When asked which accomplishment at the NAM she is most proud of, Andringa responds “encouraging and supporting the NAM team … which is very intentional and very dedicated to manufacturers.”

When Mary Andringa arrived at NAM headquarters on Wednesday, she expected a tour of the renovated office. Instead, the former NAM Board chair was surprised by an applauding crowd who gathered for the ribbon-cutting for one of the NAM’s meeting rooms, now named the Mary Andringa Room in commemoration of her decades-long service to manufacturers in the U.S. The NAM’s conference rooms are named for many luminaries of manufacturing, including Andrew Carnegie, Thomas Edison, the Wright Brothers, Jonas Salk and Marie Curie.

“I was absolutely overwhelmed, humbled and honored,” Andringa said.

A longtime supporter: Now chair emeritus of Vermeer Corporation—a family-owned, midsized manufacturer of industrial and agricultural machines in Pella, Iowa—Andringa served as NAM Board chair from 2011 to 2013 and has been an active participant on the NAM Board since the early 2000s.

• Andringa found her experience as NAM Board chair deeply meaningful, remarking on the close relationship she developed with NAM President and CEO Jay Timmons, who was also newly appointed in 2011.
• “It was a really great experience because I had a few years under my belt as CEO [of Vermeer],” Andringa said, “and I could share best practices with Jay. It was great to see how he took initiative and dug into some areas that needed more cooperation, like the NAM’s partnerships with state associations.”

Visiting the Hill: Andringa said she “enjoyed being a voice for manufacturing” in meetings on the Hill and with several administrations.

• Whether advocating against compliance regulations that created needless hardship for manufacturers, or for removing trade barriers impeding U.S. exports, Andringa stressed that she always made her case to policymakers on both sides of the aisle.
• “The NAM tries to be the voice of reason. … It has done a good job connecting with both parties and whoever is in the White House,” she said.

Read the full story here.

China’s cyber-spying capabilities are “an epoch-defining threat,” the top U.S. cybersecurity official warned this week, according to CNBC.

What’s going on: Aggressive cyber actions by China are “‘the real threat that we need to be prepared for,’ Cybersecurity and Infrastructure Security Agency Director Jen Easterly said at an appearance Monday at the Aspen Institute in Washington, D.C.”

• Easterly was answering a question about the recent discovery of Chinese cyberattacks on the U.S. military and the private sector, by a group dubbed “Volt Typhoon.”

Why it’s important: The U.S. should expect groups like Volt Typhoon to try to target pipelines and railways, Easterly said, adding, “It’s going to be very, very difficult for us to prevent disruptions from happening.”

The backdrop: Tensions have escalated between China and the U.S., leading to greater concern about attacks.

• “Fending off cyber threats from China and Asia has become a top priority for the U.S. government, which has begun to describe in clearer and blunter terms the links between the Chinese government and myriad hacking groups.”

Artificial intelligence is transforming manufacturing, and federal policies shouldn’t get in the way, NAM Director of Human Resources and Innovation Policy Julia Bogue told the Department of Commerce last week.

Four key areas: Manufacturers are chiefly concerned about AI in four areas.

• Safety: “AI is broadly used in the factory setting to prevent injury by making tasks safer,” Bogue pointed out. “AI is also used to prevent future injury by studying repetitive movement that could lead to torn rotator cuffs, wear on knee cartilage and other injuries caused over time.”
• Training: AI is also revolutionizing training for workers, teaching them how to complete tasks and learn new procedures while on the job.
• Efficiency: AI aids efficiency in a number of ways, including through predictive maintenance for manufacturing equipment. It can predict when a part will need to be replaced, so that maintenance can be scheduled at the least disruptive time. “An example of this is utilizing AI to monitor fan vibration to calculate when the fan will need to be replaced,” Bogue noted.
• Product design and development: “AI can be used to make products safer, improve quality and improve efficiency,” Bogue said.

Regulations: “Regulation should not restrict innovation or competitiveness, as the NAM believes the growth of AI represents an opportunity for manufacturers,” said Bogue. Manufacturers understand the need for careful, smart regulation, she added.

• In a recent survey by the Manufacturing Leadership Council (the NAM’s digital transformation arm), 75.9% of survey respondents said that “manufacturers should adopt a code of ethics or conduct” for the use of AI.

How to do it: The federal government should tailor its regulations to different sectors, evaluating the risks of particular use cases instead of applying a single standard, said Bogue.

• As the agency conducts its analysis, it should also consider that “our present understanding of risks, costs and benefits may be limited because technology lends itself to future unanticipated breakthroughs and applications.” 

Further reading: Interested in learning how manufacturers can apply AI technologies to their operations? Connect with the MLC to learn more—and consider signing up for its annual conference, Rethink, coming up soon on June 26–28 in Marco Island, Florida. Virtual attendance is also an option!

Artificial intelligence is transforming manufacturing, and federal policies shouldn’t get in the way, NAM Director of Human Resources and Innovation Policy Julia Bogue told the Department of Commerce last week.

Four key areas: Manufacturers are chiefly concerned about AI in four areas.

• Safety: “AI is broadly used in the factory setting to prevent injury by making tasks safer,” Bogue pointed out. “AI is also used to prevent future injury by studying repetitive movement that could lead to torn rotator cuffs, wear on knee cartilage and other injuries caused over time.”
• Training: AI is also revolutionizing training for workers, teaching them how to complete tasks and learn new procedures while on the job
• Efficiency: AI aids efficiency in a number of ways, including through predictive maintenance for manufacturing equipment. It can predict when a part will need to be replaced, so that maintenance can be scheduled at the least disruptive time. “An example of this is utilizing AI to monitor fan vibration to calculate when the fan will need to be replaced,” Bogue noted.
• Product design and development: “AI can be used to make products safer, improve quality and improve efficiency,” Bogue said.

Regulations: “Regulation should not restrict innovation or competitiveness, as the NAM believes the growth of AI represents an opportunity for manufacturers,” said Bogue. Manufacturers understand the need for careful, smart regulation, she added.

• In a recent survey by the Manufacturing Leadership Council (the NAM’s digital transformation arm), 75.9% of survey respondents said that “manufacturers should adopt a code of ethics or conduct” for the use of AI.

How to do it: The federal government should tailor its regulations to different sectors, evaluating the risks of particular use cases instead of applying a single standard, said Bogue.

• As the agency conducts its analysis, it should also consider that “our present understanding of risks, costs and benefits may be limited because technology lends itself to future unanticipated breakthroughs and applications.”

Further reading: Interested in learning how manufacturers can apply AI technologies to their operations? Connect with the MLC to learn more—and consider signing up for its annual conference, Rethink, coming up soon on June 26–28 in Marco Island, Florida. Virtual attendance is also an option!