Press Releases

Press Releases

Manufacturers Need WOTUS Proposal That Provides Permitting Certainty

Manufacturers cannot invest with confidence when the rules keep changing

Washington, D.C. – Following the release of the Environmental Protection Agency’s proposed new Waters of the United States rule, National Association of Manufacturers Senior Vice President of Policy and Government Relations Aric Newhouse issued the following statement:

“The EPA is unnecessarily rewriting critical permitting standards and tossing aside Supreme Court precedent in the process. This moving target frustrates efforts to expand domestic manufacturing and create well-paying jobs. Manufacturers cannot invest with confidence when the rules keep changing.

“Manufacturers need a sensible WOTUS proposal that provides permitting certainty and allows the industry to continue leading on environmental stewardship.”

In 2023, the Supreme Court is expected to issue a decision in Sackett v. EPA, a case that will determine the jurisdiction of the Clean Water Act and all regulations within its authority. Previously, the NAM submitted multiple sets of comments regarding the 2015 WOTUS rule to better inform policymakers. In addition, the NAM supported the 2017 executive order instructing the EPA to rescind the rule, and the NAM Legal Center had been in active litigation against the rule starting in 2015. The legal battle included a unanimous victory for the NAM at the U.S. Supreme Court on a key procedural issue, and in 2019, federal judges invalidated the rule.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Contact us with questions or requests

[email protected]

Press Releases

Congress Fails to Advance Manufacturing Tax Priorities

Bipartisan Provisions Like R&D Incentives Are Critical to Small Manufacturers’ Ability to Invest

Washington, D.C. – The National Association of Manufacturers is calling on lawmakers to immediately address critical tax provisions that were left out of the 2023 Omnibus spending package, highlighting the negative impact to small manufacturers and their workers.

“Congress’ failure to reverse tax policies that make it more costly to perform research, buy machinery and finance job-creating investments has put hundreds of thousands of American jobs and manufacturing competitiveness at risk. Despite overwhelming support for addressing these issues, Congress’ inaction will now undercut small manufacturers’ ability to invest in their workers, facilities and communities,” said NAM President and CEO Jay Timmons.

Ketchie President and Owner and Incoming Chair of the NAM Small and Medium Manufacturers Group Courtney Silver recently highlighted that congressional action on these tax priorities will help prevent small manufacturers from feeling “stuck between a rock and a hard place. It’s very important that we take action on expanding and locking in that pass-through deduction, increasing those incentives around R&D and protecting those provisions around full expensing and interest deductibility,” said Silver.

“Although the appropriations package included important manufacturing priorities, including the INFORM Consumers Act, with its protections for consumers against counterfeit goods, and the Electoral Count Reform Act, which supports a clear and secure democratic process, pro-competitiveness tax policy changes would have made a big difference for businesses of all sizes across our industry,” continued Timmons. “As the next Congress convenes, we urge lawmakers to prioritize these policies, and we will continue to work with manufacturing champions from both parties to provide tax certainty to the nearly 13 million people who work in manufacturing today.”

Read more about how these critical tax priorities impact small manufacturers across the country here.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Press Releases

Manufacturers: Protecting American Innovation Critical to Fight Current and Future Health Crises

Washington, D.C. – Following today’s announcement by the World Trade Organization’s General Council that member states have agreed to delay a final decision on an expanded intellectual property waiver for COVID-19 products, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“The WTO’s decision to delay the expanded intellectual property waiver is a welcome step toward protecting American innovation and technology leadership. This is vital not only for future pandemic responses, but also for the sector’s ability to produce new and advanced treatments or fund critical research and development.

“Manufacturers in the U.S. are leading our post-pandemic recovery and investing heavily in the development of cures and therapeutics. An expanded WTO waiver would force manufacturers in America to give away rights unfairly to international competitors and economic rivals like China, disincentivize companies from continuing the cutting-edge research underway, put jobs at risk and harm the sector’s global competitiveness.

“Manufacturers will continue to work with partners around the world to tackle current and emerging health challenges, while protecting the IP rights of those many companies which have been so essential to an effective pandemic response.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Press Releases

New Data: Taxing R&D Will Cost U.S. More Than 260,000 Jobs Next Year If Congress Doesn’t Act

Manufacturers Would Lose 60,000 Jobs and $32 Billion

Washington, D.C. – The National Association of Manufacturers released new analysis revealing that if the tax code’s research and development amortization requirement, which went into effect this year, is not reversed immediately, the U.S. economy would lose 263,382 jobs and experience an $82.39 billion hit to GDP in 2023.

Because the law changes the way businesses have handled investments for decades, companies like NAM member Miltec UV, which develops new UV lamp systems for curing inks and coatings for everything from optical fiber to soup can lids, are having to grapple with a significant new cost that they had not anticipated previously. “Absent congressional action, we’re gonna get hit hard,” said Miltec UV President Bob Blandford. “Our taxes are going to go up dramatically. That’s cash getting sucked out of the business. So that’s going to get pretty ugly.”

The manufacturing industry, which conducts 55% of private-sector R&D, would directly lose 59,392 jobs and face a decline in output of $31.69 billion. Prior to 2022, companies could immediately deduct R&D expenses in the year in which they are incurred, which promotes long-term job-creating investments in the United States. However, requiring companies to spread out these deductions over a period of years penalizes innovation by making R&D more costly.

“A failure to act will burden manufacturers large and small who use this tool to create well-paying jobs and support families and communities,” said NAM Managing Vice President of Tax and Domestic Economic Policy Chris Netram. “We need Congress to act quickly to address this and other critical tax provisions in year-end legislation before we cede our competitive edge to foreign nations like China, which provides a super deduction in the amount of 200% of R&D expenses.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Press Releases

Manufacturers: Permitting Reform Essential to Manufacturing Growth and Competitiveness

Washington, D.C. – Following consideration today of a permitting amendment in the U.S. Senate, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“Red tape and permitting delays have plagued the manufacturing industry for decades, and the need for reform has only grown more urgent in recent years. Manufacturers have long called for Congress to repair the broken permitting process to minimize delays and reduce needless litigation that stands in the way of energy and resources projects and other investments. That will ensure we can get to work quickly on the investments that the bipartisan infrastructure law and the CHIPS and Science Act make possible. It will also ensure manufacturers have access to reliable and affordable energy while the grid evolves and as we work to improve air quality and reduce greenhouse gases.

“Ultimately, permitting reform effects every part of the American supply chain—from modernizing energy projects to building new manufacturing facilities. Today’s Senate vote, while unsuccessful, should serve as a step toward true bipartisan reform. Manufacturers appreciate the efforts of Sens. Joe Manchin and Shelley Moore Capito to push this priority forward, and we will continue to work with both chambers to achieve this goal.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Press Releases

Manufacturers: An Expanded IP Waiver Would Jeopardize American Innovation and the Ability to Combat Future Pandemics

Washington, D.C. – Following the announcement by the Office of the U.S. Trade Representative calling for a delay in a World Trade Organization decision on whether to expand a waiver of intellectual property, National Association of Manufacturers Vice President of International Economic Affairs Ken Monahan released the following statement:

“An expanded intellectual property waiver would jeopardize American innovations that are fundamental to fighting current and future pandemics and undermine U.S. technology leadership over our commercial rivals, such as China. Manufacturers welcome USTR’s announcement supporting a delay in the decision on whether or not to expand the WTO’s waiver on COVID-19 products and domestic supply chains and urge all WTO members to fully consider the consequences of such an expanded waiver.

“Efforts could be better spent focusing on other effective international approaches to deal with ongoing and potential global health crises.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 58% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Press Releases

Manufacturers: President Biden and Congress Have Averted a Holiday Crisis

Washington, D.C. – National Association of Manufacturers President and CEO Jay Timmons released the following statement after President Biden signed H.J. Res. 100 into law, concluding the collective bargaining process between Class I railroads and all labor unions representing the freight rail workforce and eliminating the threat of a disastrous rail strike.

“Thanks to swift action from President Biden and his administration, and bipartisan cooperation in Congress, a holiday supply chain disaster has been averted.

“Earlier this year, manufacturers called for and supported the creation of the Presidential Emergency Board to rectify the stalemate between the unions and railways. But when it became clear they wouldn’t reach a negotiated resolution, we called on Congress to act, as a freight rail shutdown would have been devastating to the manufacturing industry, the U.S. economy and all American families.

“We thank President Biden, Secretaries Walsh and Buttigieg as well as manufacturing allies in Congress for listening to our industry and working quickly to avert this crisis.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 58% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Press Releases

Manufacturers Release New Economic Analysis Pushing Back on SEC Bond Rule Interpretation

NAM and Kentucky Association of Manufacturers File Rulemaking Petitions to Protect Private Companies from Harmful Public Disclosure Mandate

Washington, D.C. – The National Association of Manufacturers released a new economic analysis on the damaging impact of the Securities and Exchange Commission’s attempt to force private companies to disclose financial information publicly.

The SEC’s new rule interpretation would apply to private companies that raise capital via corporate bond issuances under SEC Rule 144A. If the new interpretation takes effect as scheduled in January 2023, these businesses will face decreased liquidity and increased borrowing costs—leading to significant job losses and a decline in U.S. GDP.

Key Findings:

These impacts will be felt across the economy, resulting in 30,000 jobs lost each year over the first five years the new interpretation is in effect. The job losses will increase over time—rising to 50,000 jobs lost each year after five years and 100,000 jobs lost each year after 10 years.

These job losses are attributable directly to the decreased liquidity and increased borrowing costs associated with the SEC’s new interpretation.

NAM Speaks Out:

NAM Managing Vice President of Tax and Domestic Economic Policy Chris Netram released the following statement:

“At a time of rising interest rates and economic uncertainty, manufacturers cannot afford for the SEC to roil the bond markets arbitrarily. With tens of thousands of jobs at stake, the SEC must act by year’s end to reverse this misguided interpretation.”

NAM Action:

Today, the NAM and the Kentucky Association of Manufacturers are filing two petitions for rulemaking with the SEC seeking to stop the harm this new rule interpretation would cause.

The NAM and the KAM are calling on the SEC to reverse course by clarifying—either by rule or by exemptive order—that Rule 144A issuers are not required to make public financial disclosures. The NAM and the KAM are also seeking emergency interim relief to prevent the new interpretation from taking effect in January.

Background:

  • SEC Rule 15c2-11 requires broker dealers to ensure that key information about issuers of over-the-counter equity securities is current and publicly available prior to quoting those issuers’ securities freely.
  • SEC Rule 144A allows for resales of securities (primarily corporate debt issuances) to qualified institutional buyers—large financial institutions that own or manage more than $100 million in securities. Retail investors cannot purchase Rule 144A securities. Notably, under Rule 144A, issuers are obligated to make their financial and operational information available to QIBs.
  • In September 2021 and December 2021, the SEC’s Division of Trading and Markets issued no-action letters applying Rule 15c2-11 to Rule 144A debt; the new requirements take effect in January 2023. This decision contradicted the historical application of Rule 15c2-11 to OTC equity securities and bypassed important rulemaking safeguards required by the Administrative Procedure Act.
  • The NAM has weighed in with the SEC and Congress seeking to reverse this damaging interpretation.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 58% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Press Releases

Manufacturers Call for Passage of the Respect for Marriage Act

Bill will protect current and future interracial and same-gender marriages while providing appropriate religious protections

Washington, D.C. – Today, the National Association of Manufacturers released the following statement calling for passage of the Respect for Marriage Act:

“Manufacturers know that individuals truly thrive in their careers when they can bring their authentic selves to work and feel confident that their families will be safe from discrimination or worse in the places they have chosen to live. The Respect for Marriage Act would ensure that the legal protections around which so many Americans, including manufacturing workers, have ordered their lives will not be suddenly rolled back. Codifying federal protections for interracial marriages and same-gender marriages with appropriate protections for religious liberty will help keep all families equal under the law and ensure that manufacturers can continue to hire and retain a diverse and talented workforce. It will deliver families and businesses the certainty they need and deserve.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 58% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Press Releases

Manufacturers Urge Swift Resolution to Ongoing Rail Negotiations

Washington, D.C. – National Association of Manufacturers President and CEO Jay Timmons released the following statement as negotiators work to reach an agreement between Class I railroads and all labor unions representing the freight rail workforce. Several organizations have not yet ratified the deal tentatively agreed to by union leadership and rail industry representatives in September that delayed the possibility of a strike.

“Manufacturers are urging congressional leaders to be prepared to bring stability and predictability to the economy if a rail strike and shutdown occurs. We already face economic turmoil with rising costs, product shortages and high inflation. Any nationwide rail strike or shutdown will cause even more economic pain. Manufacturers urge all parties to work rapidly—for the good of the country—to conclude this collective bargaining process.”

Background: A rail strike could begin as soon as 12:01 a.m. EST on Saturday, Nov. 19. Currently, the majority of the unions representing the rail workers have agreed to extend that deadline to Friday, Dec. 9, though a unanimous decision to maintain the status quo is required for that extension.

On Thursday, Oct. 27, the NAM joined hundreds of other associations in calling on President Biden to ensure a swift resolution and reiterating support for the work of the Presidential Emergency Board, which has aided in the talks.

Currently, the American freight rail network accounts for nearly 40% of total freight volume, and a strike or delay in finalizing a long-term contract would have devastating impacts across surface supply chain networks and economic output.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 58% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

View More