Press Releases

Washington, D.C. – Following the U.S. Supreme Court’s decision in Sackett vs. Environmental Protection Agency, National Association of Manufacturers Vice President of Energy and Resources Policy Brandon Farris released the following statement:

“The Supreme Court’s decision today will help put us on a path to regulatory certainty for manufacturers across the country as all the justices agreed that the EPA had overstepped its authority under the Clean Water Act. Manufacturers are committed to keeping our waters clean and demonstrating environmental stewardship, but Clean Water Act enforcement has been rife with ambiguities and inconsistencies, often allowing the EPA to overreach and attempt to regulate water—and even dry land—that is far beyond the scope of the law. This case demonstrates yet again why manufacturers and our economy need a sensible Waters of the United States proposal that provides clarity and certainty and allows the industry to continue leading the way on environmental protection. The EPA should heed the court’s ruling and revise its latest WOTUS proposal.”

Background:

Previously, the NAM submitted multiple sets of comments regarding the 2015 WOTUS rule to better inform policymakers. In addition, the NAM supported the 2017 executive order instructing the EPA to rescind the rule, and the NAM Legal Center had been in active litigation against the rule starting in 2015. The legal battle included a unanimous victory for the NAM at the U.S. Supreme Court on a key procedural issue, and in 2019, federal judges invalidated the rule.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Today, the National Association of Manufacturers and Make UK hosted a meeting at NAM headquarters where they formalized manufacturers’ commitment to supporting close economic ties between the United States and United Kingdom. Make UK CEO Stephen Phipson and NAM President and CEO Jay Timmons signed an updated memorandum of understanding, which will serve as a roadmap to the cooperation between the two organizations and outlines the key goals and objectives for the partnership.

“The NAM and Make UK have such a strong, special relationship, just as the U.S. and the UK do, and we must continue to deepen that partnership and the commercial and economic ties between our countries,” said Timmons. “Cooperation between American and British companies not only makes our economies stronger, but also strengthens the transatlantic strategic alliances to support the rule of law, freedom and opportunity from those who threaten our shared values. Especially with Russia’s continued assault on Ukraine, it is critical that we unleash the power of commerce to preserve, protect and expand democracy.”

The MOU calls for Make UK and the NAM to work together to provide opportunities for their members to strengthen manufacturing through a number of avenues, including exploring potential trade delegations, trade fairs and business networks; facilitating visits and economic delegations between representatives of the two organizations for promoting trade, investment and commercial exchanges among member companies and organizations; and working together on joint meetings, conferences, seminars, reports, letters and mutually agreed advocacy on trade and investment-related issues.

“Make UK is delighted to have further strengthened our partnership agreement with our American counterpart, the National Association of Manufacturers, as we focus increasingly on boosting cross-Atlantic trade,” said Phipson. “In recent months, we have agreed to a process of even broader sharing of market intelligence, data and policy work, facilitating visits for economic delegations to visit on both sides of the Atlantic to unlock new trading opportunities.

“We will continue to work ever more closely as we look to cement commercial exchanges and opportunities for shared promotion as we build on the ties that have connected our two nations for generations. Relations with the U.S. are vital, and its market is the second-most important for UK goods. In a post-Brexit world, it is likely to assume ever greater importance as part of our efforts to boost global trade.”

Click here to view the full text of the MOU.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Today, the National Association of Manufacturers filed a motion to intervene in National Center for Public Policy Research v. SEC, a case about the Securities and Exchange Commission’s authority to dictate the content of public company proxy ballots and the topics on which shareholders are required to cast votes. If granted intervenor status, the NAM will argue that the SEC’s rules requiring companies to include activist proposals on the proxy ballot violate federal securities law and the First Amendment. Following the filing of the motion to intervene, NAM Chief Legal Officer Linda Kelly released the following statement:

“Manufacturers are facing an onslaught of activists seeking to hijack the proxy ballot to advance narrow political agendas, and the SEC has become a willing partner in the effort. The corporate proxy ballot is not the appropriate venue for policy decisions better made by America’s elected representatives, and manufacturers are regularly caught in the middle as activists on the left and the right bring fights from the political arena into the boardroom. The NAM Legal Center is standing up for manufacturers to ensure they can focus on growing their businesses, driving economic expansion and job creation and creating value for shareholders.”

Background:

• Under SEC Rule 14a-8, public companies are required to include most shareholder proposals on their proxy ballot—proposals that in recent years have skewed increasingly toward social or political topics unrelated from a company’s business and its long-term value.
• The SEC evaluates company requests to exclude certain proposals from the ballot and increasingly requires companies to include and take a position on these proposals. For example, the NAM strongly opposed recent SEC guidance preventing companies from excluding proposals on environmental, social and governance topics of “broad societal impact”—irrespective of whether the proposal has any connection to the company’s operations.
• As intervenor in National Center for Public Policy Research v. SEC, the NAM would argue that the SEC cannot compel corporate speech, in violation of the First Amendment and federal securities laws, by forcing companies to include activist proposals on their proxy ballots.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – The National Association of Manufacturers has launched a six-figure television and digital advertising campaign calling for reforms to ensure pharmacy benefit managers pass on prescription drug discounts directly to workers and employers. The campaign spotlights how these insurer-owned middlemen are contributing to skyrocketing health care costs and driving up the cost of medicines by pocketing big discounts from drugmakers instead of passing them on to America’s workforce.

“America’s manufacturing workforce has struggled with skyrocketing health care costs driven by insurer-owned PBM middlemen for far too long,” said NAM President and CEO Jay Timmons. “PBMs pocket big discounts from prescription drugmakers instead of passing them on to workers and employers. Manufacturers are committed to providing quality health care benefits to our employees, so we need reforms to stop insurer-owned PBMs from keeping discounts and driving up prescription drug costs.”

To view the latest television ad, click here.

-NAM- 

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Following the release of the Environmental Protection Agency’s new rule on power plant emissions, National Association of Manufacturers Vice President of Energy and Resources Policy Brandon Farris released the following statement:

“Manufacturing in America is cleaner and more sustainable than ever, and the power generation sector has been making historic strides in bringing zero-emissions sources online. Even as that trend continues, this proposed regulation will prove unfeasible. With nearly 60% of our nation’s energy generated from natural gas and coal, this will either require deployment of still nascent technologies at an impractical pace or force those plants to shut down entirely. With the many threats to global energy security, that is a grave risk to our economy and to our families. The U.S. cannot afford to shut down more than half of our power generation and grind our economy to a halt. The NAM looks forward to working with the administration to ensure emissions standards protect public health while allowing manufacturers to continue pioneering technologies to make our air even cleaner and our climate even healthier.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. –  A new report conducted by Oxford Economics and commissioned by the National Association of Manufacturers warns that the Environmental Protection Agency’s proposed air quality regulations for particulate matter (PM2.5) are projected to threaten $162.4 billion to $197.4 billion of economic activity and put 852,100 to 973,900 current jobs at risk, both directly from manufacturing and indirectly from supply chain spending. In addition, growth in restricted areas may be constrained, limiting investment and expansion over the coming years. Due to these limited opportunities for expansion or investment, these areas in nonattainment could lose out on an additional $138.4 billion in output and 501,000 jobs through 2027.

Overall, the regulations could make it extraordinarily difficult to create new manufacturing jobs and protect existing manufacturing jobs in areas out of attainment. The regulations could also prevent much needed infrastructure improvements in these areas. This is because compliance with the regulations could require restricting manufacturing operations, resulting in fewer jobs, less investment and higher costs for consumers and families.

“Improving air quality in the U.S. is a top priority for manufacturers, and we’ve worked for years to make progress in delivering some of the cleanest manufacturing processes in the world,” said NAM President and CEO Jay Timmons. “This analysis makes clear these new regulations will weaken our ability to invest in the technology and processes that would continue to reduce emissions—while jeopardizing high-paying manufacturing jobs. We need to let manufacturers do what they do best: innovate and deploy modern technologies to protect the environment, while creating jobs and strengthening the economy.”

Key Findings:

• The regulations create a total economic exposure of $87.4 billion for manufacturing economic activity, equal to 2.4% of the U.S. manufacturing sector’s gross value added.
• The number of manufacturing jobs associated with this exposed activity is 311,600, or 1.9% of all U.S. manufacturing employment.
• Manufacturing in the U.S. exposed to the proposed standard supports between $75 billion and $110 billion in GDP and between 540,500 and 662,300 jobs in the U.S. through supply chain spending.
• Due to limits on expansion and investment, the proposed rule would put at risk approximately $138.4 billion of gross value added (in 2021 prices) and 501,000 jobs in 2027 in areas of nonattainment.
• Under the proposed rule, 200 counties could be placed out of attainment.
• California’s manufacturing sector will be most exposed, followed by Michigan and Illinois.
• Manufacturing operations in the U.S. are environmentally cleaner than the global average.

Find the latest information on the NAM’s efforts to oppose top-down air regulations, including statements from manufacturing leaders, here.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Following the Securities and Exchange Commission’s decision to finalize its costly and unnecessary stock buybacks rule, National Association of Manufacturers Managing Vice President of Tax and Domestic Economic Policy Chris Netram released the following statement:

“The NAM is disappointed that the SEC has chosen to unjustifiably punish manufacturers for returning capital to their shareholders. Manufacturers, investors, retirement plans and the entire economy benefit when companies can efficiently allocate capital via share repurchases. The NAM was successful in convincing the SEC to abandon the most damaging aspect of its initial proposal, but the commission’s attempt to discourage these commonplace, commonsense transactions via an overly complicated, expensive and unworkable disclosure mandate is nevertheless a departure from its mission to enhance capital formation and protect investors.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Phoenix, AZ – National Association of Manufacturers President and CEO Jay Timmons and the Arizona Chamber of Commerce & Industry President and CEO Danny Seiden jointly hosted Sen. Kyrsten Sinema (I-AZ) for a discussion with members of the Arizona Manufacturers Council and other local business leaders today at Mercury Systems in Phoenix, Arizona. The conversation focused on the manufacturing workforce and how immigration reform is urgently needed to strengthen it.

“The majority of Americans agree that the United States has a broken and unreliable immigration system, and our industry is united in the belief that this broken system is harming manufacturers’ competitiveness. With nearly 700,000 open jobs in manufacturing today and millions to fill this decade, immigration must be part of the solution,” said Timmons. “We must stay true to the values that have made America exceptional and kept manufacturing strong: free enterprise, competitiveness, individual liberty and equal opportunity, and that requires a functioning immigration system that addresses our economy’s needs, as well as security and humanitarian concerns. Today’s discussion is an important step in the path toward building consensus for advancing immigration reforms, and we thank the Arizona Chamber of Commerce & Industry and Sen. Sinema for their leadership.”

“Arizona has emerged as a premier destination for manufacturing growth, thanks to the pro-business policies we’ve implemented on a state level that have cut regulations and created an attractive tax environment for job creators to locate and expand,” said Chamber President and CEO Danny Seiden. “Of course, there is so much to be done at the federal level to ensure the continued competitiveness and success of our state and nation’s manufacturing industry – and immigration and workforce must be a part of the discussion. We are grateful for the partnership and leadership of Sen. Sinema and NAM in addressing this critical issue.”

“Mercury was delighted to host Sen. Sinema and global technology manufacturing leaders for this important conversation,” said Tom Smelker, Mercury Systems’ vice president and general manager of microsystems. “The vast majority of advanced semiconductor packaging is done in southeast Asia today, and the United States recognizes the need for more secure domestic capacity. But our skilled labor workforce is constrained, and we need a faster path to bring in more talent.”

Background: The NAM’s immigration policy recommendations are outlined in “A Way Forward,” a plan originally released in 2019 and recently updated to reflect current challenges. The NAM’s “A Way Forward” proposal identifies seven core areas of action for Congress and the administration to take:

• Strengthen border security through physical infrastructure and best-in-class technology.
• Prioritize America’s workforce needs through reforms to the legal immigration system.
• Reform nonimmigrant visas and temporary worker programs to reflect employer needs, including a fund to support STEM programs so that we can reduce the need for these types of visas in the future.
• Provide a permanent and compassionate solution for populations facing uncertainty, including the Dreamers, who were brought here as children and know no other home.
• Reform asylum and refugee programs for a more orderly and humane system, including asylum standards consistent with our values.
• Fix the problem of the unauthorized population with a firm reset, requiring an orderly process of review, including financial penalties for those who seek to become legal and deportation for those who choose to stay in the shadows.
• Strengthen the rule of law, with a focus on gang violence and on requiring localities to cooperate to advance the enforcement of immigration priorities.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Following the American Investment in Manufacturing (AIM) Act, bipartisan, bicameral legislation that would reinstate the Earnings Before Interest, Tax, Depreciation and Amortization (EBITDA) measure for U.S. businesses, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“America’s leadership in the world and our ability to defend American values depend on a strong and thriving manufacturing industry. The AIM Act will strengthen our ability to make critical investments in machinery and equipment while protecting more than 450,000 American jobs,” said Timmons. “We thank the bipartisan group of House and Senate members who understand that a competitive tax environment is a key driver to ensure that we can continue to grow and invest in manufacturing in America at this critical time.”

Over the past month, both chambers of Congress introduced legislation to 1) restore the immediate deductibility of research and development costs; 2) reverse the new, stricter limit on interest deductibility; and 3) revise the tax code to restore businesses’ ability to take 100% deductions for equipment and machinery purchases in the tax year of purchase.

“While the U.S. tax code is making it harder for manufacturers to grow, other countries are encouraging industrial investment. For example, China is giving manufacturing companies there a 200% deduction for R&D, while the U.S. only offers a fraction of that. The legislation that’s been introduced can help us turn the tables and make it easier for America to out-innovate China,” Timmons added. “So we’re asking Congress and the Biden administration to make passage of these bills a priority so we can build on the successes that we had following tax reform in 2017, when manufacturers were able to keep their promises and invest in their companies and communities across the board.”

Background:

Research and development: On Jan. 1, 2022, a harmful tax change went into effect that makes R&D more expensive in the United States by requiring businesses to deduct their R&D expenses over a period of years.

Read more about the NAM’s work on this provision here.

Interest deductibility: When manufacturers borrow funds to buy capital equipment, the interest they pay on those loans is tax deductible up to a certain limit. But a recent change in the tax law modified how that limit is calculated—shrinking the deduction for companies that invest in long-lived depreciable assets, making debt financing more expensive and  the U.S. an outlier among advanced economies and leaving less capital for job creation and investment.

Read more about the NAM’s work on this provision here.

Full expensing: Under the 2017 tax law, manufacturers were able to deduct 100% of their investments in assets with long, useful lives, supporting their ability to acquire vital equipment and strengthening their competitiveness. However, the ability to deduct 100% of these costs began to phase down at the beginning of 2023 and is set to expire completely in 2027.

See how full expensing has benefited small manufacturers in the United States here.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – The National Association of Manufacturers has announced Brandon Farris as its new vice president of energy and resources policy.

“Brandon joins the NAM at a pivotal time in our country and for our industry,” said NAM President and CEO Jay Timmons. “Manufacturers across the United States face regulatory challenges that affect their ability to do what they do best: transform and deploy modern technologies to protect the environment, while creating jobs and strengthening the economy. Commonsense regulatory and permitting reform, along with energy security, are needed now more than ever. Brandon’s experience and expertise will help manufacturers accomplish these critical goals.”

Before joining the NAM, Farris was the head of federal government relations for The Chemours Company, where he played an integral role in securing passage of the AIM Act, designed to phase out refrigerants that contribute to climate change. He worked closely with the NAM to help secure bipartisan ratification of the Kigali Amendment to the Montreal Protocol during the 117th Congress. Along with these and other major legislative accomplishments, he was honored as a 2022 top lobbyist by the National Institute for Lobbying & Ethics.

Previously, Farris served as assistant general counsel for Arkema as well as senior counsel for government relations for the Saudi Basic Industries Corporation. After serving in the Marine Corps Reserve, he began his career in Washington as a Bryce Harlow Foundation Fellow at the George Washington University School of Law while working on the U.S. House Agriculture Committee.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.