Tax

The House Financial Services Committee held a hearing yesterday titled “Reforming the Proxy Process to Safeguard Investor Interests”—and NAM Managing Vice President of Policy Chris Netram was there to represent manufacturers. The committee is in the middle of a monthlong series of hearings on environmental, social and governance topics and other issues related to the proxy process.

The background: Manufacturers often face challenges from politically motivated activists who use the proxy voting process to gain attention for issues unrelated to the companies’ success, and from a Securities and Exchange Commission that has empowered these activists.

The topline: At the hearing, Netram called on Congress to rein in the SEC’s regulatory overreach, keep activists out of the boardroom and protect Americans’ investments in manufacturing growth.

• “Focusing on financial returns helps businesses grow and safeguards investors’ retirement security,” said Netram. “But in recent years, third parties have hijacked the proxy process to distract companies from this duty: activists use the proxy ballot to advance political and social agendas, proxy firms dictate corporate governance decisions, and the SEC is empowering these groups—while also proposing ESG disclosure mandates of its own.”

Depoliticizing corporate governance: Netram called on Congress to stop activists from abusing the proxy ballot to pursue social and political agendas. That means preventing the SEC from forcing companies to include irrelevant proposals on their ballots, and instituting further reforms like making it harder for activists to resubmit the same unpopular proposals regularly.

• “Turning the proxy ballot into a debate club diverts time and resources away from shareholder value creation and forces companies to wade into controversial topics over which they have no control,” said Netram. “Congress must prevent the SEC from forcing companies to include irrelevant proposals on their ballots.”

Reining in proxy advisory firms: Netram spoke about the need to restrict the outsized influence that proxy advisory firms exercise on corporate governance, including by protecting investors from conflicts of interest, enforcing antifraud standards, limiting robo-voting and requiring proxy firms to engage with impacted businesses.

• “Despite their power, proxy firms operate with minimal regulatory oversight—and the SEC has rescinded modest protections that were adopted in 2020 to inform and protect investors,” said Netram. “This means that the firms’ conflicts of interest, errors and lack of transparency go largely unchecked.”

Pushing back on ESG disclosure mandates: Netram also called on Congress to limit the SEC’s ESG reporting rules by requiring only material disclosures from public companies rather than demanding far-reaching information that increases costs for manufacturers and overwhelms investors.

• “Investors need material information to make informed investing decisions and grow their retirement savings,” said Netram. “Instead, the SEC has proposed far-reaching mandates that won’t inform investors—but will harm manufacturers. Congress must limit the SEC’s regulatory onslaught.”

The last word: “Politically motivated activists are pursuing inflexible ESG agendas with little regard to their impact on everyday Americans’ financial security—and the SEC is increasingly a partner in their effort,” said Netram.

• “If this trend is allowed to continue, then small manufacturers will be hardest hit. I’ve spoken to NAM members who are deeply concerned about potentially losing public company customers or facing insurmountable regulatory costs because they just can’t keep up with ESG.”

This year’s biggest celebration of manufacturing is coming up soon in October—and manufacturers who want to take part should start planning now.

On MFG Day—Friday, Oct. 6—and throughout the rest of the month, manufacturing companies, community colleges and associations will have their best opportunity to show young people all the industry has to offer them, via factory visits, career fairs and more. So how can companies make the most of it?

Recently, the Manufacturing Institute—the NAM’s 501(c)3 nonprofit workforce development and education affiliate—hosted a webinar to share tips, insights and resources for companies interested in putting on their own MFG Day events.

The participants: The webinar, titled “Making the Most of Your Event,” was hosted by MI Director of Student Engagement Jen White. It included presentations and insights from GenMet Corporation CEO Eric Isbister and American Honda Motor Co. Assistant Manager of Government and Industry Relations Meredith Reffey.

Find your event: Manufacturers can engage in a range of different kinds of events—from career fairs to school visits to challenges and competitions.

• The most common MFG Day event is a facility tour or open house, which allows students, educators and parents to see firsthand the work that manufacturers do every day.
• But whether a manufacturer opens their doors for a tour or designs a “Parents’ Night” for family members, the most important thing is to find an authentic way to connect with community members, the panelists recommended.
• “If you are reaching students and educators, parents, even community members, then you’re … growing awareness of manufacturing and hopefully exciting folks about potentially working in the industry,” said White.

Show yourself: According to Isbister, the first priority of an MFG Day event should simply be to present careers in manufacturing as a viable option for community members.

• “We’ve had over 3,000 students tour here, and our goal … is to let them know that manufacturing exists,” said Isbister. “Most of them don’t, most parents don’t. Most teachers and guidance counselors and school board members don’t have the faintest idea of what we do. And when they walk in the building, their jaws hit the ground, and they’re excited to see things.”

Expand the circle: While engaging students is important, companies should be sure to invite others in the community as well, Isbister said.

• “Don’t just invite students [to your event], but teachers and guidance counselors and administrative people and school board members,” said Isbister. “If you get a student, you got one. If you get a teacher, you got 24. If you get a school board member, you’ve got the person with the pen who can authorize things—and that’s important, too.”

Know your audience: According to Reffey, it’s critical to meet audiences where they are.

• One of the most important lessons Honda has learned from past events is that high school audiences respond well to hands-on activities—particularly those that have an element of competition. By offering activities that the audience enjoys, manufacturers can amp up excitement and promote more engagement.

• “High school students can act very ‘too cool’—but if you set things up as a competition, they break out of their shells,” said Reffey. “Put a racing simulator in front of ’em, they seem to come unglued. They get so excited to participate.”

Get involved: The MI has a range of resources designed to help manufacturers create effective events—and White emphasized that those resources are open and available to all manufacturers interested in using them.

• “Being involved with MFG Day, hosting events, using the branding that’s available on the website, registering your events on MFGday.com and all of our resources and toolkits are 100% free to you,” said White. “You do not have to be an MFG Day sponsor. You do not have to be an NAM member. It is 100% free for you to use. We want as many companies and partners of manufacturers involved in MFG Day as possible.”

Learn more: Manufacturers are encouraged to reach out with any questions to [email protected].

Providing health care benefits to workers is becoming increasingly expensive for manufacturers, but Congress can take measures to help offset these costs, according to a new NAM study.

What’s going on: The NAM released “Manufacturers on the Front Lines of Communities: A Deep Commitment to Health Care” yesterday. The report includes the results of surveys and manufacturer interviews that detail industry-wide health benefits and trends, as well as federal policy proposals that could jeopardize manufacturers’ ability to continue offering health care plans.

Key findings: Below are some of the report’s most notable takeaways:

• Tax incentives: Designing and offering health care benefits is getting more expensive for employers. To fight these rising costs, Congress must keep in place the tax benefits offered to companies providing such plans to workers.
• Affordability: Employer-offered health care must be affordable for employees. To ensure that it is, Congress should consider seeking revision of some of the opaque rules governing health and flexible savings accounts and pharmacy benefit managers.
• Early intervention: Intervening in health-related situations early—as in the cases of obesity, cancer and other conditions—can lower future costs for employers and employees alike. Primary care can catch and help correct many illnesses and so must be incentivized.

The last word: “Manufacturers feel a deep commitment to providing quality health care for their employees despite the increased costs and challenges of doing so,” said NAM Director of Human Resources and Innovation Policy Julia Bogue.

• “Manufacturers are innovative in their health benefits to best address the challenges employees face, from primary care to chronic-condition management.”

The NAM met with North American trade ministers last week in Cancun, Mexico, where it urged them to take up key trade priorities for manufacturers.

What happened: The NAM led a delegation from the American business community, which participated in a roundtable discussion ahead of the third United States–Mexico–Canada Agreement “Free Trade Commission” on July 7 in Cancun.

• Attendees at the roundtable event included NAM President and CEO Jay Timmons, U.S. Trade Representative Katherine Tai, Canadian Minister of Small Business, Export Promotion and International Trade Mary Ng, Mexican Secretary of the Economy Raquel Buenrostro and business executives from the three countries, including Rockwell Automation Chairman and CEO Blake Moret.

Shared values: The NAM underscored the importance of an investment climate underpinned by core democratic principles, such as transparency and the rule of law.

• “We believe in democracy,” Timmons said. “However imperfect, this system fosters free enterprise, competitiveness, individual liberty and equal opportunity. These values make manufacturing strong in our countries.”
• He added that each year North American manufacturers contribute $3 trillion to the U.S., Canadian and Mexican economies.

What must be done: Though the USMCA already creates advantages for North American manufacturers, the agreement’s full potential can only be realized if the three countries work together to address certain key challenges, Timmons told the attendees. Some of the main hurdles include:

• Mexico’s power-generation policies, which have long favored Mexican state-owned energy companies and led to higher bills for manufacturers that must use existing energy-supply contracts;
• Permitting delays for U.S. projects in Mexico that undercut American firms and reduce energy supply to North American manufacturers and consumers;
• Mexico’s expanded food-labeling requirements and bans on the sale of some U.S. foods and nonalcoholic beverages to minors, which unjustly restrict U.S. exports;
• High spectrum fees in Mexico that deter telecommunications competition, as well as the country’s weak patent enforcement, delayed approvals of pharmaceuticals and bans on certain chemicals and genetically modified corn; and
• Delays in the reform of Canada’s patent system, ongoing restrictions in Canada’s dairy market, a Canadian government proposal to brand “plastic manufactured items” as “toxic substances” and a change to Quebec packaging and labeling requirements that will upend decades of intellectual property law and could limit access to the Quebec market.

The last word: “Ensuring North American economic integration and regional competitiveness will require a multipronged effort that focuses on robust implementation of the USMCA, ensuring a competitive North American energy market and providing support for the manufacturing workforce across the region, among other key elements,” said NAM Vice President of International Economic Affairs Ken Monahan, who joined Timmons in Cancun.

• “The NAM has positioned itself as a leading U.S. business organization on North American trade and economic matters, and we look forward to continuing to engage with our member companies on these issues going forward.”

Manufacturers across the United States are driving economic expansion while also supporting sustainable business practices, enhancing diversity in the workforce and combatting climate change. Yet, politically motivated activists threaten to slow this progress by insisting on their own narrow agendas. Recent actions by the Securities and Exchange Commission will empower these groups and divert resources from manufacturers’ investments in job creation and business growth.

As the Financial Services Committee in the House of Representatives begins a monthlong hearing series on environmental, social and governance topics and other issues related to the proxy process, NAM President and CEO Jay Timmons is calling on Congress to rein in the SEC’s regulatory overreach and keep activists out of the boardroom.

Depoliticizing corporate governance: Activists on the left and right are increasingly abusing the proxy ballot to advance narrow social and political agendas. The SEC has taken steps in recent years to support and empower these activists.

• The NAM is suggesting reforms to the rules governing shareholder proposals that will prevent activists from hijacking the proxy ballot in pursuit of political agendas unrelated to long-term business growth and shareholder value creation.

Reining in proxy advisory firms: Despite their significant conflicts of interest, errors and lack of transparency, proxy firms exercise outsized influence on corporate governance. More oversight and accountability are needed to protect manufacturers and Main Street investors from these powerful actors.

• The NAM is pressing Congress to ensure that proxy firms are regulated appropriately by the SEC—including by requiring that the firms disclose and manage their conflicts of interest and allow companies to review their draft recommendations.

Protecting Main Street investors: In the face of pressure from ESG activists and proxy firms, the financial institutions that manage Americans’ 401(k) accounts and pension plans must take steps to protect these Main Street investors’ retirement savings.

• The NAM is calling on lawmakers to ensure that asset managers cast proxy votes and make investing decisions solely in Main Street investors’ financial best interests—and without over-relying on proxy firms and ESG ratings organizations.

Limiting ESG disclosure mandates: The SEC’s aggressive ESG rulemaking agenda will increase costs and liability for manufacturers and overwhelm investors with a deluge of irrelevant information.

• The NAM is urging Congress to limit any SEC disclosure mandates to information that is material to shareholders’ investing and voting decisions.

The last word: “Congress must step in to depoliticize the business decisions that impact the lives and life savings of millions of Americans,” said Timmons. “Manufacturers are determined to create jobs, lead the economy and improve the quality of life for all Americans. We are counting on [Congress’] leadership to counter the SEC’s regulatory overreach and help us achieve these goals.

The NAM met with North American trade ministers last week in Cancun, Mexico, where it urged them to take up key trade priorities for manufacturers.

What happened: The NAM led a delegation from the American business community, which participated in a roundtable discussion ahead of the third United States–Mexico–Canada Agreement “Free Trade Commission” on July 7 in Cancun.

• Attendees at the roundtable event included NAM President and CEO Jay Timmons, U.S. Trade Representative Katherine Tai, Canadian Minister of Small Business, Export Promotion and International Trade Mary Ng, Mexican Secretary of the Economy Raquel Buenrostro and business executives from the three countries, including Rockwell Automation Chairman and CEO Blake Moret.

Shared values: The NAM underscored the importance of an investment climate underpinned by core democratic principles, such as transparency and the rule of law.

• “We believe in democracy,” Timmons said. “However imperfect, this system fosters free enterprise, competitiveness, individual liberty and equal opportunity. These values make manufacturing strong in our countries.”
• He added that each year North American manufacturers contribute $3 trillion to the U.S., Canadian and Mexican economies.

What must be done: Though the USMCA already creates advantages for North American manufacturers, the agreement’s full potential can only be realized if the three countries work together to address certain key challenges, Timmons told the attendees. Some of the main hurdles include:

• Mexico’s power-generation policies, which have long favored Mexican state-owned energy companies and led to higher bills for manufacturers that must use existing energy-supply contracts;
• Permitting delays for U.S. projects in Mexico that undercut American firms and reduce energy supply to North American manufacturers and consumers;
• Mexico’s expanded food-labeling requirements and bans on the sale of some U.S. foods and nonalcoholic beverages to minors, which unjustly restrict U.S. exports;

Read the full story here.

Manufacturers across the United States are driving economic expansion while also supporting sustainable business practices, enhancing diversity in the workforce and combatting climate change. Yet, politically motivated activists threaten to slow this progress by insisting on their own narrow agendas. Recent actions by the Securities and Exchange Commission will empower these groups and divert resources from manufacturers’ investments in job creation and business growth.

As the Financial Services Committee in the House of Representatives begins a monthlong hearing series on environmental, social and governance topics and other issues related to the proxy process, NAM President and CEO Jay Timmons is calling on Congress to rein in the SEC’s regulatory overreach and keep activists out of the boardroom.

Depoliticizing corporate governance: Activists on the left and right are increasingly abusing the proxy ballot to advance narrow social and political agendas. The SEC has taken steps in recent years to support and empower these activists.

• The NAM is suggesting reforms to the rules governing shareholder proposals that will prevent activists from hijacking the proxy ballot in pursuit of political agendas unrelated to long-term business growth and shareholder value creation.

Reining in proxy advisory firms: Despite their significant conflicts of interest, errors and lack of transparency, proxy firms exercise outsized influence on corporate governance. More oversight and accountability are needed to protect manufacturers and Main Street investors from these powerful actors.

• The NAM is pressing Congress to ensure that proxy firms are regulated appropriately by the SEC—including by requiring that the firms disclose and manage their conflicts of interest and allow companies to review their draft recommendations.

Read the full story here.

Washington, D.C. – The leading organizations representing manufacturers and millions of manufacturing workers in the United States, Mexico and Canada released the following statement on the three-year anniversary of the United States–Mexico–Canada Agreement (USMCA/T-MEC/CUSMA)

“On this three-year anniversary, we recognize the substantial value that the United States–Mexico–Canada Agreement has represented for our industry’s competitiveness, our economies and North American workers. Manufacturing is critical for the entire North American economy. Our closely integrated supply chains contribute more than $3 trillion annually to the North American economy, and more than $2 billion worth of manufactured goods cross our borders each day.

“Free trade has benefited manufacturers across North America for decades, and the USMCA helps to secure those advantages. The USMCA can only reach its full potential if it is fully implemented in a manner that upholds its letter and spirit. The National Association of Manufacturers, the Confederation of Industrial Chambers of Mexico and Canadian Manufacturers & Exporters continue to strongly and respectfully urge political leaders of all three countries to work together to live up to the commitments of the agreement, which garnered broad support in the U.S., Mexico and Canada. Full compliance with the agreement will provide certainty for the more than 23 million manufacturing workers in the United States, Mexico and Canada and boost our region’s ability to take full advantage of the one-in-a-generation opportunity to strengthen our supply chains though the attraction of new economic activities to North America.

“The strong and unique partnership between the U.S., Mexico and Canada goes beyond our economic alliance. It is rooted in our shared values of democracy, the rule of law, transparency, free enterprise and opportunity. As we see those values under attack around the world, it is critical that we strengthen our regional alliance to elevate and defend those values—for the good of our people and people around the world, as well as for our economic and national security.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

For Fernando Torres, the vice president of operations at thermoplastics manufacturer Greene Tweed, the issue of immigration is personal. In 1996, at the age of 16, Torres immigrated to the United States. He was undocumented for a time, and he was forced to figure out how to stay afloat.

His story: Alone, without stable residency and barely speaking the language, Torres had a harrowing start in the U.S. But he worked his way through community college, where he excelled in math courses even though he wasn’t yet fluent in English. Torres attributes his love for math and science to his grandfather, who he says is the smartest man he’s ever met.

• “I had a difficult situation at the age of 16 in a new country without knowing the culture or the language, asking, what am I going to do?” said Torres. “Living in this country, it’s the country of opportunities, so I had to find ways to make it work and pursue the American dream.”
• “But, as an undocumented person, the jobs available were not pretty. Whether I was washing dishes at a seafood restaurant or cutting the lawns in Arizona in the middle of the 120-degree weather summers, I just had to find a way to survive.”

Entering the industry: After community college, Torres was accepted into Arizona State University’s program for aerospace engineering—and eventually, he found a place in the commercial sector at Greene Tweed. Today, he’s a U.S. citizen, and he’s just as passionate as ever about the value of immigration.

Immigration and manufacturing meet: Torres has seen the skills gap in manufacturing firsthand, and he knows how difficult it is to fill critical jobs. That’s one reason why immigration is so important to the manufacturing industry, he pointed out.

• “There is a shortage of people,” said Torres. “Skilled laborers are very difficult to find in our country, and retirements are outpacing anyone that’s coming in. There’s not enough people to run our factories—and if we want the economy to grow, we need people to grow it.”

An economic issue: Torres also emphasized that a person’s stance on the issue of immigration in manufacturing should come down to economic considerations.

• “We need to stop talking about immigration as a political issue—it’s a business issue,” said Torres. “We don’t have enough people to grow this economy internally. And if we can’t grow it internally, we have to open factories elsewhere. So this isn’t a political need, it’s an economic need.”

NAM’s push for change: NAM has long fought for commonsense immigration reform and outlined a series of proposals in A Way Forward—a road map that covers border security, reforms to legal immigration and permanent solutions for populations like DREAMers that are facing uncertainty.

The last word: “Immigrants are here to give, not to take away from this country—and we give a lot,” said Torres. “If it wasn’t for the waves of immigration during the last century to the United States, we wouldn’t be the number one economy in the world.”

Businesses “that provide tools, chemicals and other supplies for the semiconductor industry” may now apply for a piece of the funds set aside in last year’s CHIPS and Science Act, according to The Wall Street Journal (subscription).

What’s going on: Late last week, the Biden administration announced broadened eligibility for companies capable of using federal subsidies to increase chip production in the U.S.

• Last year’s legislation, which the NAM championed, earmarked $39 billion for the purpose.
• In February, the Commerce Department’s CHIPS Program Office began “accept[ing] applications for the construction, expansion, or modernization of semiconductor materials and manufacturing equipment facilities for which the total capital investment equals or exceeds $300 million,” according to the National Institute of Standards and Technology, which is part of Commerce.

Why it’s important: “‘We can have as many fabs [chip plants] as we want, but the reality is, we also need the supply chain—the chemicals, the material, the tools that go into those fabs,’ Commerce Secretary Gina Raimondo said at a briefing,” according to the Journal.

Lots of interest: Nearly 400 businesses across 37 states have signaled their interest in receiving funds under this latest phase.

• “The department is already accepting full applications for the C[HIPS] Act funding from companies with plans to build facilities for leading-edge semiconductors, and will soon accept submissions from companies that plan to build chips that are currently state-of-the-art or older.”
• Suppliers may begin submitting applications this fall, but the administration has not yet said when the funds will be disbursed.