Research

What’s the state of manufacturing in the U.S.? Strong and resilient—but under threat.

That was the message delivered by NAM President and CEO Jay Timmons and other speakers at the NAM’s 2024 State of Manufacturing Address at RCO Engineering in Roseville, Michigan, on Thursday.

• Attending the address were nearly 100 RCO Engineering team members—some of whom are second- or even third-generation manufacturing workers—as well as local education leaders, including Macomb Community College President James O. Sawyer IV and Macomb Intermediate School District Superintendent Michael R. DeVault.
• The address was the keystone event of this week’s launch of the 2024 Competing to Win Tour, an opportunity to visit local manufacturers and report on where the industry stands at the start of 2024. 

A place of strength: “The state of the manufacturing industry depends on the people in it,” Timmons said in remarks covered by POLITICO Influence (subscription). “And we are now 13 million strong—the largest in more than 15 years. If we can continue on this trajectory, this resurgence, imagine what the state of manufacturing might look like in 2030.”

• Johnson & Johnson Executive Vice President and Chief Technical Operations & Risk Officer and NAM Board Chair Kathy Wengel echoed that sentiment in her opening remarks. “Manufacturers are improving the quality of life for everyone. … Together, we can lead the way.”
• And Michigan Manufacturers Association President and CEO John Walsh told the audience at RCO Engineering, “You are making parts here that are going everywhere. It’s a phenomenal story for us in Michigan. It not only helps you as employees here, but it helps your families, it helps your communities. It builds our state. It builds our nation.”
• “Manufacturing … is an industry that is vital to our economic competitiveness,” said Macomb County Executive Mark Hackel. “In Macomb County, we’re not just witnessing the growth of manufacturing; we’re actively contributing to it. What we are doing here is creating an environment where innovation thrives and where manufacturers can grow as well as compete.”
• RCO Engineering General Manager Jeff Simek agreed. “The manufacturing brand is coming back, and it’s coming back alive—and you guys are a big, huge piece of that,” he said to loud applause. 

Fork in the road: But continued manufacturing strength isn’t guaranteed, Timmons said. Rather, it’s in large part contingent on sound policy decisions by U.S. leaders.

• “We will head in the wrong direction if Congress lets taxes go up on small businesses when rates expire next year,” Timmons said. “Or if they hit you with even more regulations—regulations even harsher than ones they have in Europe. Or if they fail to solve the immigration crisis because they put politics over good policy. Or choose trade barriers rather than trade agreements, or … abandon our allies overseas and put our national security at risk.”
• The recent regulatory onslaught by federal agencies—which Timmons discussed with Fox Business earlier this week—must stop and be replaced with sensible rulemaking done in cooperation with manufacturers, he said.
• He cited the Environmental Protection Agency’s recently finalized, overly stringent standard for particulate matter and the Biden administration’s decision to freeze liquefied natural gas export permits. This “forc[es] our allies, like Europe and Japan, to buy dirtier energy from countries we can’t trust, potentially enriching the likes of Russia … undercut[ting] our most basic national security objectives,” Timmons said.

No new taxes: The NAM’s message to Congress on taxes is simple: “No new taxes on manufacturers in America,” Timmons said. 

• “And while we’re at it, Congress should bring back some of the tax policies that made it easier for manufacturers to invest in the future.”

On immigration: The U.S. needs a common-sense solution to immigration, and it needs it now, Timmons said.

• While manufacturers may not like every piece of the bipartisan border deal that was recently killed in the Senate, “here was my test: Does it make us more secure than we are today? Yes. Does it make our workforce stronger than it is today? Yes. And does it help our allies overseas? Yes,” said Timmons.

Come what may: No matter what the November elections bring, manufacturers will continue to do the jobs so many people depend on them to do, Timmons concluded.

• “Our commitment is to work with anyone, and I truly mean anyone, who will put policy—policy that supports people—ahead of politics, personality or process. We will stand with you if you stand with us in advancing the values that have made America exceptional and keep manufacturing strong.” 

As candidates look to claim the support of manufacturers in 2024, the NAM launched its year-long 2024 Competing to Win Tour in South Carolina, days ahead of the South Carolina GOP primary.

• The tour spotlights the issues critical to winning not just manufacturers’ votes but also more manufacturing in the U.S.

Why it’s important: “We came to South Carolina to showcase the people and stories behind our industry and to translate their perspectives into action that will make our industry and country stronger,” said Johnson & Johnson Executive Vice President and Chief Technical Operations & Risk Officer and NAM Board Chair Kathy Wengel, who joined NAM President and CEO Jay Timmons, South Carolina Chamber of Commerce President and CEO Bob Morgan and South Carolina Manufacturers Alliance President and CEO Sara Hazzard on the first day of the tour.

• “Building these strong relationships beyond Washington, D.C., in the cities and states driving our sector deepens our understanding of regional challenges and reinforces the NAM as the leading voice representing all manufacturers, large and small,” Wengel added.

The launch: The tour began at Milliken & Company’s headquarters in Spartanburg on Wednesday, a poignant reminder of the importance of just one global technology-based manufacturer to lives, innovation and progress.

• The company’s 3,200 associates in the Palmetto State, as well as its broader U.S. and global team, make everything from safety gear and wound dressings and bandages to eco-conscious materials and technological innovations, such as digital printing, flooring, sustainable coating additives and more.
• “The average person touches about 30 to 50 [Milliken products] a day,” said Milliken President and CEO Halsey Cook.
• “Milliken embodies what we believe: manufacturing makes a positive difference. Their commitment to sustainability, ethics (named a World’s Most Ethical Company 17 years running) and a people-first workplace create a ripple effect,” said Timmons. “It’s why we need everyone supporting the success of manufacturers in South Carolina and the United States—to empower companies just like Milliken and help us grow more of them right here in America,” Morgan emphasized.
• “Milliken is a remarkable brand ambassador for the entire manufacturing industry in the United States,” summed up NAM Managing Vice President of Brand Strategy Chrys Kefalas. “As Michael Brown, Milliken’s executive vice president of operations, conveyed to us, the company is showing that digital transformation and artificial intelligence can be a force for good, helping its people leverage data analytics, for example, accelerating innovation and making modern manufacturing even more exciting for the next generation to be a part of.”

A boom story: Springs Creative Products Group CEO Derick Close, who heads several small enterprises in South Carolina, brought the NAM tour to Fort Lawn, South Carolina, where state-private partnerships and sound competitiveness policies have led to a boom in manufacturing investment and jobs.

• According to Close, recent investments in the community exceed $2.5 billion and stand to add 1,500 new jobs.
• Close, who is an economic development champion for South Carolina, took time to brief the group on how the area is ground zero as well in the story of the revival—and revolution—happening for the U.S. textile manufacturing sector, showing that U.S.-based textile manufacturers can compete against the rest of the world at quality, speed and price, so long as misguided policies don’t impede current advances. Springs Creative’s digital printing facility, which the NAM toured, is just one example. Springs Creative produces fabrics for such companies as Disney, Tempur-Pedic and Walmart.
• An added highlight of Close’s showcase was a tour of the new 1.5-million-square-foot, $423 million E. & J. Gallo wine and spirits production and distribution center—a testament to U.S. ingenuity and the more than 275 jobs it’s already created (with more on the way) to produce the best-selling spirit in the U.S. 

The message: The discussions at Milliken and Springs Creative focused on the need for policies that support manufacturing’s growth, from R&D incentives and competitive taxes to sensible regulations, resilient supply chains and permitting reform, to workforce development, including immigration reform, and energy policy.

The platforms: As newsrooms dwindle, the NAM is stepping into the breach, using its platforms, like NAM.org, social media and its email newsletters, including Input, to amplify manufacturing’s narrative. It’s a bid to ensure that as policymakers and candidates court manufacturers, they’re armed with real stories and concrete policy needs from the ground.

Looking ahead: The tour will continue across the United States, gathering insights and stories to bolster the NAM’s advocacy efforts. Next up: the Competing to Win Tour brings the NAM State of Manufacturing Address to Roseville, Michigan, as well as to Sanders Chocolate and Triumph Gear Systems in Macomb County on Thursday.

Norway voted Tuesday to open its waters to deep-sea mining, the process of harvesting valuable metals from the ocean floor, CNBC reports.

What’s going on: Having approved a government proposal Tuesday to allow exploration in its waters, “Norway is poised to become one of the first countries in the world” to allow deep-sea mining.

• The parliament formally agreed to allow exploration of just more than 108,000 square miles of Arctic seabed between Norway and Greenland.
• Companies will be required to “submit proposals for licenses,” which will be granted on a case-by-case basis.

Why it’s important: “Advocates say removing metals and minerals from the ocean’s seabed is necessary to facilitate a global transition away from fossil fuels,” CNBC reports.

• Many of the critical minerals needed for electric vehicles—including cobalt, copper and nickel—are present in large quantities on the seafloor.
• The move by Norway sets it apart from the United Kingdom and the European Union, “which have pushed for a temporary ban” on deep-sea mining, citing environmental concerns.
• In the U.S. last year, lawmakers introduced legislation calling for a deep-sea mining moratorium pending further research into the method’s environmental impacts, according to Honolulu KHLN.

The NAM says: “Norway’s vote should be a wake-up call to the U.S. that other nations are doing everything possible to secure their own sources of critical minerals. We need to do the same,” said NAM Vice President of Domestic Policy Brandon Farris. “That means first reforming our antiquated permitting system.”

Washington, D.C. – National Association of Manufacturers President and CEO Jay Timmons released the following statement on the passing of Supreme Court Justice Sandra Day O’Connor:

“After her ascension to the Supreme Court earned her a place in history, Justice O’Connor earned the respect of a grateful nation for a firm commitment to our Constitution, the rule of law and our American values of individual liberty and equal opportunity. The barrier-breaking first woman on the Supreme Court inspired generations with what President Reagan once described as ‘those unique qualities of temperament, fairness, intellectual capacity and devotion to the public good.’ It was the honor of a lifetime to interview her onstage at an NAM board meeting, and I realized very quickly that you could not sit down with Justice O’Connor without getting a proper grilling in return and being put in your place with a few well-placed zingers. When I asked her to tell us about a difficult case, she quipped, ‘Why would you ask a question like that? They were all difficult, of course, or they wouldn’t have come before the Supreme Court!’

“Justice O’Connor continued her commitment to public service even in retirement, spearheading efforts to strengthen civics education in our schools. As we mourn her passing and celebrate her legacy, the best way to honor her would be to continue advancing her mission. As she once said in a commencement address, ‘If we focus our energies on sharing ideas, finding solutions and using what is right with America to remedy what is wrong with it, we can make a difference.’ Sandra Day O’Connor certainly made a difference that will reverberate through the centuries. Manufacturers extend our deepest condolences to her family and loved ones.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

The U.S. and 17 other countries have agreed to “a set of guidelines to ensure AI systems are built to ‘function as intended’ without leaking sensitive data to unauthorized users,” The Hill reports.

What’s going on: The 20-page document—unveiled last Sunday and published jointly by the Department of Homeland Security’s Cybersecurity and Infrastructure Security Agency and the UK National Security Centre—enumerates recommendations for everything “from AI system design and development to its deployment and maintenance.”

• The agreement discusses threats to AI systems, how to protect AI models and data and how to release and monitor AI systems responsibly.
• Other signatories include Canada, Australia, Germany, Israel, Nigeria and Poland.

Why it’s important: “This is the first time that we have seen an affirmation that these capabilities should not just be about cool features and how quickly we can get them to market or how we can compete to drive down costs,” said U.S. Cybersecurity and Infrastructure Security Agency Director Jen Easterly.
 

The Environmental Protection Agency is considering an effective ban of a chemical compound called ethylene oxide. However, abruptly eliminating the chemical from use could have profound negative consequences for manufacturers and make modern life much more difficult.

The background: Ethylene oxide is a chemical used in a wide range of products, from textiles to plastics to antifreeze. It’s also used to sterilize certain medical devices—and in some cases, it’s the only chemical effective for that purpose.

The problem: The EPA is considering a new regulation that would set the acceptable levels of the chemical in the atmosphere so low that it amounts to a ban on the compound.

• “If you took a monitor outside in any U.S. city center, where no manufacturing production occurs, the level of ethylene oxide would be higher than the level the EPA is proposing,” said NAM Vice President of Domestic Policy Brandon Farris.
• “So anywhere that manufactures or uses ethylene oxide would be above the level they’re suggesting. The EPA is effectively banning it by creating a level that’s so low it can’t possibly be met.”

The impact: Because there are no current substitutes for some uses of ethylene oxide, a de facto ban would have immediate and serious impacts.

• “If this rule is finalized, a large number of medical devices could no longer be sterilized, and a lot of items that are relied on for modern life, such as textiles, plastics, household cleaners and adhesives, could not be produced in their current form,” said Farris. “If the EPA moves forward with this proposal, there will be no alternatives for the critical uses of this compound.”

The timeline: The final rule is expected to be released in the next few months. If the EPA chooses to finalize the rule in its current form—which would create a de facto ban on production and usage—manufacturers would be required to find a replacement for the chemical immediately. Developing a replacement in such a short amount of time will be difficult if not impossible.

• “One of the problems with creating a regulatory timeline for replacement is that science doesn’t work on an agency’s timeframe,” said Farris. “With no off-the-shelf substitute, it could take years to replace essential products, if we’re able to replace them at all.”

Our actions: The NAM is pushing back aggressively on this rule and raising manufacturers’ concerns with the White House, Congress and the EPA.

The bottom line: “This as proposed is a bad regulation,” said Farris. “Policymakers need to go back to the drawing board, recognize the critical applications of ethylene oxide and develop a proposal that is grounded in reality.”

Learn more about the NAM’s efforts to fight regulatory overreach here. 

What sort of computer can evaluate 67 million potential solutions in 13 seconds? Only a quantum computer. But what sort of problem has 67 million solutions to begin with?

Many manufacturing challenges do, from optimizing supply chain logistics to finding the most efficient way to load millions of pallets. In recent years, another mind-bendingly complex problem has begun to occupy the industry: how to get potentially dangerous chemicals in a category known as PFAS out of use and out of our environment.

Quantum computing firm D-Wave says that quantum holds the key, as its massive computing power could find new ways to remove or remediate the chemicals, or even help identify which of the thousands of chemicals in this class are indeed dangerous. We recently spoke to D-Wave Global Government Relations and Public Affairs Leader Allison Schwartz to get the details.

How it works: As Schwartz explains it, quantum is “a completely different form of computing.”

• “Due to superpositioning and quantum entanglement, quantum can look at all possibilities at once and come back with an answer very quickly,” she said, in a way that classic computers just can’t match.
• However, some of the best solutions are a product of both classic computers and quantum, an option known as “hybrid” applications. For example, Davidson Technologies collaborated with D-Wave to create a hybrid solution that produced the aforementioned 67 million scenarios in 13 seconds.
• “Classical computing alone can’t do that,” Schwartz observed.

When quantum meets PFAS: So how does this help with PFAS? Schwartz told us that there are two different types of quantum computing that would prove useful.

• The first, annealing quantum computing systems, are superior at providing optimized solutions. These systems can quickly run through millions of scenarios that model potential chemical spills, methods of remediating the chemicals, techniques for removing them from operations entirely and much more. These systems are commercially available today through the cloud.
• Meanwhile, gate model systems offer another avenue for dealing with PFAS—they can potentially invent alternative molecules that could substitute for the dangerous chemicals. However, gate-model systems are not large enough yet to tackle real-world problems.

Doing the research: Quantum could also play a role in determining which chemicals are harmful in the first place, added Schwartz. There are thousands of PFAS chemicals out there, but so far, only a few hundred have been studied.

• To examine the effects of various chemicals, researchers and companies will have to undertake clinical trials. Quantum can help optimize the organization of those trials, as well as aid in analyzing the results—for example, by assisting with medical imaging reconstruction.

So what’s the holdup? With such a powerful tool at the ready, you might think policymakers would be jumping at the chance to encourage its use. In fact, quantum has yet to be used in a PFAS-related application, though Sens. Gary Peters (D-MI) and Joni Ernst (R-IA) mentioned its use in 2019 legislation later incorporated into the 2021 National Defense Authorization Act.

• However, “The EPA or DOE could recommend using quantum to optimize the PFAS work. It doesn’t need a legislative fix,” Schwartz noted. Instead, policymakers are more focused on finding replacement chemicals, a process that could take years, while incremental solutions could have a huge effect today.
• “Policymakers are relying on manufacturers to address the problem, but they aren’t providing insight into how emerging technology, such as quantum computing, can help manufacturers better achieve success,” said Schwartz.

Making quantum work for you: For manufacturers looking at quantum as a potential problem-solver, whether for PFAS or something else, Schwartz explained how D-Wave approaches new clients.

• First, a company’s leaders sit down with consultants at D-Wave, who conduct an in-depth examination of its operations—for example, by investigating which PFAS chemicals might be in use, how remediation might be accomplished or how contamination should be modeled.
• Once a problem or problems are identified, D-Wave builds a demo to test out potential options. It might build a custom algorithm or even a digital twin, as it did in partnership with SavantX to optimize container loading at the Port of Los Angeles. This step helps to hone the algorithm so it can find the right solutions for the manufacturer’s specific problem.
• Then D-Wave will work with the manufacturer to pilot the solution, making sure it functions as expected.
• And finally, the solutions are integrated into the production process and become part of daily operations.

The last word: “Tackling PFAS is a multipronged effort that calls for industry, academic and government collaboration,” said D-Wave CEO Dr. Alan Baratz. “Instead of waiting for a replacement chemical that could be years away, it is time to break down this societal problem and identify which parts of the problem can be addressed with quantum technology today.”

What sort of computer can evaluate 67 million potential solutions in 13 seconds? Only a quantum computer. But what sort of problem has 67 million solutions to begin with?

Many manufacturing challenges do, from optimizing supply chain logistics to finding the most efficient way to load millions of pallets. In recent years, another mind-bendingly complex problem has begun to occupy the industry: how to get potentially dangerous chemicals in a category known as PFAS out of use and out of our environment.

Quantum computing firm D-Wave says that quantum holds the key, as its massive computing power could find new ways to remove or remediate the chemicals, or even help identify which of the thousands of chemicals in this class are indeed dangerous. We recently spoke to D-Wave Global Government Relations and Public Affairs Leader Allison Schwartz to get the details.

How it works: As Schwartz explains it, quantum is “a completely different form of computing.”

• “Due to superpositioning and quantum entanglement, quantum can look at all possibilities at once and come back with an answer very quickly,” she added.
• However, some of the best solutions are a product of both classic computers and quantum, an option known as “hybrid” applications. For example, Davidson Technologies collaborated with D-Wave to create a hybrid solution that produced the aforementioned 67 million scenarios in 13 seconds.
• “Classical computing alone can’t do that,” Schwartz observed.

When quantum meets PFAS: So how does this help with PFAS? Schwartz told us that there are two different types of quantum computing that would prove useful.

• The first, annealing quantum computing systems, are superior at providing optimized solutions. These systems can quickly run through millions of scenarios that model potential chemical spills, methods of remediating the chemicals, techniques for removing them from operations entirely and much more. These systems are commercially available today through the cloud.
• Meanwhile, gate model systems offer another avenue for dealing with PFAS—they can potentially invent alternative molecules that could substitute for the dangerous chemicals. However, gate-model systems are not large enough yet to tackle real-world problems.   

Doing the research: Quantum could also play a role in determining which chemicals are harmful in the first place, added Schwartz. There are thousands of PFAS chemicals out there, but so far, only a few hundred have been studied.

• To examine the effects of various chemicals, researchers and companies will have to undertake clinical trials. Quantum can help optimize the organization of those trials, as well as aid in analyzing the results—for example, by assisting with medical imaging reconstruction .

Read the whole story here.
 

Since the onset of COVID-19 in 2020, supply chains have faced extraordinary challenges around the world. In the midst of shortages and disruptions, as well as global conflicts, how can manufacturers ensure that they receive the materials they need and deliver their products on time?

At a recent NAM event, attended by more than 75 executives from both manufacturing companies and association partners, Supply Chain Insights Founder Lora Cecere addressed the question of how the industry can build resiliency into the supply chain of the future. Here’s some useful advice from her keynote speech, called “Supply Chain Workshop: Connecting and Securing the Supply Chain for 2030.”

Defining resilience: As Cecere noted, in many cases manufacturers may have different ideas about what resilience represents—and it’s important to settle on a clear definition.

• “I define resilience as the ability to have the same cost quality and customer service given the level of demand and supply variability,” she said.

Differentiating supply chains: While most manufacturers talk about the supply chain as a unified system, Cecere encouraged participants to differentiate various kinds of supply chains from one another.

• “We have responsive supply chains that are all about time—things like flu vaccines and bathing suits,” which must be shipped during certain seasons, Cecere observed.
• “And then there’s the agile supply chain, which is very low volume and not predictable. We can’t measure that in the same way we measure the efficient supply chain, but we need to manage flow.”
• “We don’t have just one supply chain. We have multiple supply chains,” she emphasized.

Putting customers at the center: As businesses design and adjust their supply chains, customers can get lost in the equation, Cecere cautioned. In one exercise she has used in her research, she asks participants to draw a supply chain—and the results she’s received show how many manufacturers are leaving out an important piece of the puzzle.

• “Most people will start with a truck, smokestack, then a factory, a mill,” said Cecere. “But isn’t the supply chain really about the customer? And how do we align the customer from the customer’s customer to the supplier’s supplier? … The role of the supply chain is the delivery to the customer.”

Using data effectively: According to Cecere, about 80% of supply chain data is not used. She encourages manufacturers to look creatively at the wide range of data available to generate useful insights.

• “We’re not looking at all the data we have, and we’re not thinking hard enough about how we use it,” she said.

Developing purple unicorns: Cecere encouraged participants to develop teams of “purple unicorns”—people with strong supply chain domain knowledge who can also innovate—and allow them to test new ideas and learn from failure.

The last word: “Supply chain excellence is not functional excellence—it is the ability to drive outcomes,” said Cecere. “This cannot be about the lowest cost; this has to be about the best potential of flow for cost, quality, customer service and inventory.”

Learn more: For more information, check out the full presentation here.

Since the onset of COVID-19 in 2020, supply chains have faced extraordinary challenges around the world. In the midst of shortages and disruptions, as well as global conflicts, how can manufacturers ensure that they receive the materials they need and deliver their products on time?

At a recent NAM event, attended by more than 75 executives from both manufacturing companies and association partners, Supply Chain Insights Founder Lora Cecere addressed the question of how the industry can build resiliency into the supply chain of the future. Here’s some useful advice from her keynote speech, called “Supply Chain Workshop: Connecting and Securing the Supply Chain for 2030.”

Defining resilience: As Cecere noted, in many cases manufacturers may have different ideas about what resilience represents—and it’s important to settle on a clear definition.

• “I define resilience as the ability to have the same cost quality and customer service given the level of demand and supply variability,” she said.

Differentiating supply chains: While most manufacturers talk about the supply chain as a unified system, Cecere encouraged participants to differentiate various kinds of supply chains from one another.

• “We have responsive supply chains that are all about time—things like flu vaccines and bathing suits,” which must be shipped during certain seasons, Cecere observed.
• “And then there’s the agile supply chain, which is very low volume and not predictable. We can’t measure that in the same way we measure the efficient supply chain, but we need to manage flow.”
• “We don’t have just one supply chain. We have multiple supply chains,” she emphasized.

Learn more: To hear more from Cecere, attend “Manufacturing in 2030: The Coming Data Value Revolution,” an event of the NAM’s digital-transformation arm, the Manufacturing Leadership Council, Dec. 6-7 in Nashville, Tennessee. Register here.    

Read the full story here.