Energy

Manufacturers across many sectors were surprised in recent weeks by a ban on products containing a chemical called PIP (3:1), which was slated to go into effect after March 8, 2021. Due to the incredibly short compliance window and because PIP has not been regulated elsewhere in the world, it is a major challenge even to identify its potential presence in supply chains.

The sudden ban could have caused significant disruption in the manufacturing industry and snarled the economic recovery, NAM Vice President of Energy and Resources Policy Rachel Jones tells us. Here’s what you need to know.

Why it matters:  While there is no PIP chemical manufacturing in the United States, it can be found in a broad array of components that are used in electronics; robotics and manufacturing equipment; gaskets, clamps, tubes, harnesses, cables and casings; and in many other applications for flame retardant purposes. The ban would have a serious impact on manufacturers in the United States, forcing them to scrutinize every component of their supply chains for PIP, rework manufacturing processes and find new materials in an impossibly short timeframe.

The COVID-19 angle: Many of the products that would be impacted by this rule are being used to conduct research into COVID-19, whether that involves an examination of COVID-19 variants or developing, producing, storing and distributing COVID-19 vaccines. If this rule goes forward without being fixed, some of these products could become unavailable at a time when they are needed most.

What we did: The consensus from some experts was that changing the Biden EPA’s approach on this matter was a futile effort. But the NAM pressed forward and asked the EPA to issue a “no action assurance” for downstream manufacturers until the PIP rule can be amended to include a reasonable compliance timeframe. At the same time, the NAM moved forward in court to preserve relief options and to ensure that manufacturers affected by the rule can be made whole.

The results: After the NAM’s intervention, the EPA announced a 180-day “No Action Assurance” and opened a new 60-day comment docket to reexamine the rule. The NAM will continue to work with the EPA to find a reasonable approach that supports manufacturers and upholds critical standards.

The last word: Jones says, “When manufacturers are willing to speak up on challenging issues, we can solve complex problems. I have zero doubt that EPA’s extraordinary action was in response to our work with many NAM members and collaborative solutions-focused advocacy. While we celebrate this important interim victory, it is only a 180-day window of relief and manufacturers need more time.”

As President Joe Biden took office yesterday, the NAM took a pragmatic stance, calling this new political era “a time for healing.” As NAM President and CEO Jay Timmons put it, “Today, manufacturers recommit ourselves to be part of the solution—to be part of the healing process. We invite all Americans to join us in doing the same.”

And since the new president started his first day with a flurry of executive orders, the NAM responded to those, too. Here’s a rundown of the new policies, plus the NAM’s statements.

Immigration: While also moving to reverse a ban on immigration from certain Muslim-majority countries, President Biden strengthened the Deferred Action for Childhood Arrivals program, offering support to the so-called Dreamers. He called on Congress to pass comprehensive immigration reform that provides Dreamers with permanent status and a path to citizenship.

• Responding to the DACA action, Timmons said, “Manufacturers are very encouraged by today’s critical first step. . . .  The broad goals of the Biden plan align with many of the core recommendations in ‘A Way Forward,’ manufacturers’ post-partisan roadmap for immigration reform. The path we have laid out is one that we believe can bring the country together, and we look forward to working with the Biden administration to move a comprehensive immigration reform plan through Congress.”

Keystone XL: President Biden also rescinded the permit for the Keystone XL pipeline, at least temporarily erecting a barrier to its progress.

• “Manufacturers are disappointed with the administration’s decision to block this sustainable project, which can serve as a model for infrastructure of the future, and if not reconsidered, represents a missed opportunity for manufacturing workers in America,” said Timmons. “Manufacturers have a strong commitment to responsible environmental stewardship, and protecting our environment does not require us to walk away from his job-creating opportunity.”

COVID-19: Ten executive orders focused on combating the COVID-19 pandemic, according to CNBC. The NAM had called for aggressive actions to support manufacturers’ COVID-19 response months ago, including in its April “American Renewal Action Plan” and, mostly recently, in conversations with the transition team.

• The orders included a new COVID-19 response office as well as a pandemic supply chain resilience strategy to help strengthen domestic production of important supplies.
• President Biden also restored U.S. membership in the World Health Organization and directed agencies to use the Defense Production Act to spur production of critical materials like N95 masks, swabs and other vaccine- and virus-related equipment.

“It’s very encouraging to see [President Biden] is starting off with strong, decisive action to fight COVID-19, save lives and get our economy on the road to recovery,” said Timmons on Twitter. “Manufacturers are committed to ending this deadly pandemic.”

Masks on: One of President Biden’s orders will now require masks to be worn on federal property, and he plans to require masks on public transportation as well. The NAM has prioritized face coverings since the beginning of the pandemic, including by launching a “Wear a Face Covering” ad campaign and providing a crucial estimate of how many masks American businesses need.

• “President Joe Biden is showing real leadership with his executive orders on masks,” said Timmons. “Masks save lives, help us keep our economy open and are vital until we can all get vaccinated.”

Washington, D.C. – Following President Joe Biden’s executive order to rescind the permit for the Keystone XL project, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“Manufacturers are disappointed with the administration’s decision to block this sustainable project, which can serve as a model for infrastructure of the future, and if not reconsidered, represents a missed opportunity for manufacturing workers in America. The Keystone XL project would employ 10,000 union workers for pipeline construction, spur additional renewable energy projects, operate with net-zero emissions and improve our energy security.

“This critical union project has evolved over the past five years, so we look forward to highlighting the importance of this modern project for manufacturers. Rebuilding our economy will require us to invest in infrastructure of all types, including Keystone XL. Manufacturers have a strong commitment to responsible environmental stewardship, and protecting our environment does not require us to walk away from this job-creating opportunity.”

Recently, the NAM and several labor unions wrote to President Biden on the impact of rescinding the permit for the Keystone XL project and the ways the project has evolved in recent years.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.3 million men and women, contributes $2.32 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 63% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Washington, D.C. – The National Association of Manufacturers called on President-elect Joe Biden to help ensure the future strength of manufacturing in America by extending key executive orders into the new administration and rescinding those that have harmed manufacturing.

“For decades, we have worked with policymakers from across the ideological spectrum to craft policies that encourage the growth of manufacturing in the United States,” said NAM President and CEO Jay Timmons in a letter to the incoming administration. “Now more than ever, America needs leaders in Washington who are focused on increasing American jobs, wages and investment.”

The letter outlines executive orders that have had a significant impact, positive or negative, on manufacturers over the past four years, and it urges the president-elect “to reverse the most harmful of these orders and keep or expand those that create an environment that is conducive to growing America’s manufacturing sector.”

The NAM’s recommendations will help manufacturers continue to respond to the devastating pandemic and will also power the United States’ economic recovery by setting the stage for manufacturing growth.

To read the full letter, click here.

Background:

The NAM has requested President-elect Biden repeal the following executive orders and consider executive orders for extension.

Executive Orders

Rescind:

• “Rescission of the Deferred Action for Childhood Arrivals Program”
• E.O. 13950 – “Combating Race and Sex Stereotyping”
• E.O. 13672 – “Revocation of Federal Contracting”
• E.O. 13769 – “Protecting the Nation from Foreign Terrorist Entry into the United States”
• “President’s Report to Congress on the Proposed Refugee Admissions for FY 21”
• Presidential Proclamation 10052 – “Suspending Entry of Aliens Who Present a Risk to the U.S. Labor Market Following the Coronavirus Outbreak”
• E.O. 13944 – “Ensuring Essential Medicines, Medical Countermeasures and Critical Inputs Are Made in the United States”
• E.O. 13948 – “Lowering Drug Prices by Putting America First”
• E.O. 13957 – “Creating Schedule F in the Excepted Service”

Extend:

• E.O. 13771 – “Reducing Regulation and Controlling Regulatory Costs”
• E.O. 13805 – “Establishing a Presidential Advisory Council on Infrastructure”
• E.O. 13766 – “Expediting Environmental Reviews and Approvals for High-Priority Infrastructure Projects”
• E.O. 13845 – “Continuing the President’s National Council for the American Worker and the American Workforce Policy Advisory Board”
• E.O. 13932 – “Modernizing and Reforming the Assessment and Hiring of Federal Job Candidates”
• E.O. 13777 – “Enforcing the Regulatory Reform Agenda”
• E.O. 13806 – “Assessing and Strengthening the Manufacturing and Defense Industrial Base and Supply Chain Resiliency of the United States”
• E.O.s – “Strengthening the Federal Government’s Anti-Counterfeiting Efforts”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.3 million men and women, contributes $2.32 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Following the Environmental Protection Agency’s decision on emissions standards for airplanes, which aligns U.S. standards with those set by the International Civil Aviation Organization, National Association of Manufacturers Vice President of Energy and Resources Policy Rachel Jones released the following statement:

“America’s aerospace manufacturers have been pioneers in developing the technologies that have cut in half airline travel’s carbon footprint over the past 30 years. We support these new CO₂ standards because aligning with international rules will further strengthen the American aerospace manufacturing sector and drive innovation, support American jobs and put us in a position to continue leading on the global stage. As we help lead our country’s response to COVID-19, manufacturers remain committed to advancing responsible environmental stewardship.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Following passage of Senate amendment to H.R. 133 – United States Mexico Economic Partnership Act [Consolidated Appropriations Act, 2021], National Association of Manufacturers Vice President of Government Relations Jordan Stoick released the following statement:

“Manufacturers secured many of our top priorities in this important legislation, including numerous provisions the NAM first proposed in our ‘American Renewal Action Plan.’ The additional funds for the Paycheck Protection Program will provide a continued lifeline for small manufacturers. Furthermore, the resources for testing and vaccine distribution, as well as tax incentives for manufacturers that keep employees on payroll and invest in safety measures, will ensure America’s dedicated, essential manufacturing workers can continue their mission safely.

“Across the country, manufacturers are providing the vaccines, PPE and supplies needed to defeat COVID-19, so we have been fully engaged with House and Senate leaders to keep this vital work going. We have a difficult winter ahead, and this legislation will help save lives and livelihoods and keep manufacturers operating. As folks continue to roll up their sleeves and receive initial doses of the vaccine, we are also looking to the other priorities facing us in the new year—including historic investments in infrastructure, energy innovation and more—to ensure manufacturers can lead a full economic recovery and American renewal.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – Following President-elect Joe Biden’s nomination of former Michigan Governor Jennifer Granholm to be Secretary of Energy, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“As a former governor of Michigan, Jennifer Granholm understands that a strong and thriving manufacturing industry means well-paying jobs for American workers. She also knows that manufacturers in America not only are innovative producers of domestic energy but also depend on a reliable energy supply to grow and create jobs.

“We look forward to working with her in pursuit of manufacturers’ ‘all-of-the-above’ approach to energy development, balancing the needs of American consumers and manufacturers, the opportunities for American workers and the responsibilities of protecting our environment. And we congratulate Gov. Granholm on her nomination.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Washington, D.C. – Today, President Trump signed an Executive Order declaring a National Emergency to expand the domestic mining industry, support mining jobs, alleviate unnecessary permitting delays.

In response to the Executive Order Rachel Jones, NAM’s Vice President of Energy & Resources Policy, released the following statement:

“The country is depending on the many products we make—from equipment for our frontline medical workers to technologies making modern education and entertainment possible for both comfort and safety during these uncertain times. As we look at ways to onshore, this EO takes a smart, comprehensive approach to increase domestic production and processing of these critical mineral resources at the front end of the manufacturing supply chain. Capitalizing on our natural resource potential in a responsible and sustainable way is critical to both competitiveness and improved environmental performance of manufacturing in America.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.1 million men and women, contributes $2.36 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 63% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Scrubbing CO2 out of natural gas power plant emissions just got easier, due to a breakthrough from scientists at the University of California, Berkeley, Lawrence Berkeley National Laboratory and ExxonMobil.

The bottom line: The new technology is six times more effective at removing CO2 than current technologies . . . hitting an impressive 90% capture rate, according to a writeup in Gas World.

How it works: “The new technique uses a highly porous material called a metal-organic framework (MOF), modified with nitrogen-containing amine molecules to capture the CO2 and low temperature steam to flush out the CO2 for other uses or to sequester it underground.”

But remember, it takes federal policies to support this kind of wholesale carbon capture. And speaking of which . . .

Sneak peek: The NAM is working on a raft of climate recommendations, which it will release later this year. Here’s a preview of what the report will recommend on carbon capture. Lawmakers should:

• “Finish clarifying the rules governing access to the Section 45Q carbon capture tax credit so that project developers have the certainty they need to make investments in CCUS projects”;
• “Develop a clear standard for the handling of long-term liability for CO2 transfers”;
• “Resolve pore space ownership issues”;
• “Correct barriers to CO2 storage on federal lands”;
• “Reform the class VI underground injection program to foster the build-out of underground CO2 storage projects”;
• “Increase funding for federal CCUS research, development and demonstration programs”; and
• “Ensure programs are authorized and reduce permitting barriers that delay construction of CCUS projects.”

Washington, D.C. – Following House passage of S. 4148, to extend the authorization for the Chemical Facility Anti-Terrorism Standards program for three more years, National Association of Manufacturer’s Vice President of Energy & Resources Policy Rachel Jones released the following statement:

“Manufacturers have long called on Congress to secure our nation’s essential supply chains and facilities. Responding to and recovering from COVID-19 depends on a supply chain capable of efficiently providing many of the lifesaving products – such as personal protective equipment, medical supplies and pharmaceuticals – these facilities help manufacture.

“The fight against COVID-19 is far from over, but today, manufacturers scored a significant win when Congress passed a three-year reauthorization of the Chemical Facility Anti-Terrorism Standards program. Manufacturers are deeply committed to the communities in which they live and serve, especially during this critical time, so we advocated this reauthorization in our COVID-19 Policy Action Plan Recommendations. This security program ensures that manufacturers can remain focused on combating this global pandemic and avoid attacks from other enemies.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 11.7 million men and women, contributes $2.37 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 63% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org