Timmons Gives NAM State of Manufacturing Address
Manufacturing has a leading role in the U.S. economy—but there is still a great deal more to do. That was the message at this year’s NAM State of Manufacturing Address from NAM President and CEO Jay Timmons.
Timmons spoke to a gathering of manufacturing team members and the media at Husco in Waukesha, Wisconsin. In his remarks, he laid out the NAM’s view of where the industry is and where it’s going.
The program: The event began with a message from Kurt Bauer, president and CEO of Wisconsin Manufacturers & Commerce, followed by an introduction from NAM board member Austin Ramirez, president and CEO of global engineering and manufacturing company Husco.
- “Wisconsin manufacturers contribute to the vitality of our state through their innovation, productivity and commitment to customer satisfaction,” said Bauer. “While we face many challenges, we are also in the enviable position of controlling our destiny—as long as we work together to create a shared vision of prosperity and an action plan to achieve it.”
- “We are here to shine a light on the amazing, life-changing work that manufacturers do every day,” said Ramirez. “We are the backbone of the American economy, and we are proud of it.”
The state of manufacturing: Timmons spoke about Russia’s invasion of Ukraine, the importance of the manufacturing industry’s support for the Ukrainian people and the larger struggle between freedom and tyranny.
- “Despite everything happening around us, like the threat of a recession and global conflict, manufacturers are still leading the way forward,” said Timmons.
- “And although our industry and our country will need to make audacious and sometimes uncomfortable changes to adapt to economic, political and global challenges … I’m confident in reporting that the state of manufacturing in America remains steadfast and resolute.”
Manufacturing solutions: Timmons cited a variety of manufacturing challenges, then detailed the NAM’s plans to fight for manufacturers across the United States.
- Supporting immigration: “For so many manufacturers in America right now, there are more open jobs than there are people to fill them,” said Timmons. “One of the many ways we fill those jobs and keep our economy moving is welcoming immigrants into our workforce … just like we have in the past to build a stronger, more prosperous America.”
- Promoting permitting reform: “Permitting reform means making it easier to get permission to build that new road or power plant, or for manufacturers to build new facilities,” said Timmons. “If Washington could just cut through the bureaucracy and streamline processes, like you do in your businesses every single day, we could do more for this country.”
- Fighting for tax fixes: “The NAM is determined to get Congress to restore incentives for R&D and get our business tax rates and structure back on track to enable us to compete globally,” he said. “And then, let’s lock in competitive rates for small businesses … so that you can plan confidently for the future.”
- Competing with China: “If we’re going to counter China, then we must hold China accountable for the trade commitments it has already made to the U.S.,” said Timmons. “And we have to forge ambitious, cutting-edge trade agreements with our allies. Other countries aren’t waiting around. So, let’s think big. And let’s be bold.”
- Pushing back on new EPA rules: “We’re going to tell the EPA that manufacturers are already leading [in cleaning] our air,” said Timmons. “The government shouldn’t enact rules that, however well-intentioned, would make it more difficult to achieve our environmental goals, slow our economic growth and push us closer toward recession.”
The last word: “History shows us that as long as manufacturers lead the way, America and our democracy will remain that beacon of freedom and hope for people around the world,” said Timmons. “Manufacturers have been, and always will be, in word and deed, the arsenal of democracy. And working together, I know we will keep making this a manufacturing decade.”
Manufacturing Associations Launch Coalition to Curb Regulatory Onslaught in Washington
Sector Requests Senior-Level Adviser Designated to Coordinate Efforts Among Agencies Within the White House
Washington, D.C. – Today, the National Association of Manufacturers, members of the NAM’s Council of Manufacturing Associations and Conference of State Manufacturers Associations launched Manufacturers for Sensible Regulations, a coalition addressing the impact of the current regulatory onslaught coming from federal agencies.
According to the NAM’s Q2 2023 Manufacturers’ Outlook Survey, more than 63% of manufacturers report spending more than 2,000 hours per year complying with federal regulations, while more than 17% of manufacturers report spending more than 10,000 hours.
“President Biden and Congress have prioritized strengthening the manufacturing sector in America through historic legislation like the Bipartisan Infrastructure Law, the CHIPS and Science Act, initial permitting reform actions in the Fiscal Responsibility Act and even some energy provisions in the Inflation Reduction Act,” said NAM President and CEO Jay Timmons. “Unfortunately, the continued onslaught of regulations is having a chilling effect on investment, curtailing our ability to hire new workers and suppressing wage growth, especially for small and medium-sized manufacturers. The recently released regulatory agenda from the administration shows this barrage isn’t stopping.”
“Washington is creating tremendous doubt across our sector at a time when we’re still dealing with economic uncertainty. And the unbalanced regulations coming out of this administration threaten to undermine our ability to grow, compete and win on a global scale,” said American Cleaning Institute President and CEO, NAM board member and CMA Chair Melissa Hockstad. “We want President Biden’s manufacturing agenda to succeed. Unfortunately, we are seeing the signs that the regulatory agenda is jeopardizing the investments enacted over the past 18 months.”
“U.S. pulp and paper manufacturers recognize the need to address the challenges of our changing climate and share the administration’s goal to secure a more sustainable future,” said American Forest & Paper Association President and CEO Heidi Brock. “This can only be achieved by working with—not against—manufacturers to craft achievable and balanced regulations that address environmental challenges without threatening manufacturing jobs.”
“Manufacturers have proven to be extraordinarily resilient in recent years, leading Utah and the entire country coming out of the pandemic and through times of geopolitical turmoil,” said Utah Manufacturers Association President and CEO, NAM board member and COSMA Chair Todd Bingham. “But the regulatory agenda currently coming out of our nation’s capital has the potential to derail the gains we’ve made during this administration. We will work with our state partners and the White House to find solutions to help grow our sector in the most responsible way possible.”
The NAM survey also highlighted that only 67% of manufacturers are positive about their own company’s outlook, the lowest since Q3 2019. It shows the consequences of regulations: If the regulatory burden on manufacturers decreased, 65% of manufacturers would purchase more capital equipment, and more than 46% would increase compensation.
The group has been meeting with key members of the Biden administration and Congress to highlight the devastating impact of unbalanced regulations.
-NAM-
The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.
-CMA-
With a membership including 260 national manufacturing trade associations representing 130,000 companies worldwide, the Council of Manufacturing Associations creates partnerships across the industry, amplifies manufacturers’ voices and connects members to experts and trade association executives. CMA members gain insights, share perspectives, form coalitions and ensure manufacturers have a strong voice in national policy.
-COSMA-
Members of the Conference of State Manufacturers Associations serve as the NAM’s official state partners and drive manufacturers’ priorities on state issues, mobilize local communities and help move federal policy from the ground up in all 50 states and Puerto Rico.
House Majority Whip Emmer, NAM Spotlight Cost of Regulations and Policies to Boost Manufacturing
Princeton, MN – The National Association of Manufacturers hosted House Majority Whip Tom Emmer (R-MN) at Glenn Metalcraft for a facility tour on Monday to discuss the impact of the current regulatory burden manufacturers are facing across federal agencies.
Leaders also discussed manufacturers’ policy priorities as outlined in the latest version of “Competing to Win,” the NAM’s comprehensive blueprint to bolster manufacturers’ competitiveness.
“My visit to Glenn Metalcraft demonstrated the need to address the regulatory state overwhelming manufacturers in the heartland. Small and medium-sized manufacturers are working hard to grow their businesses and increase compensation for employees, but those efforts are undermined by new regulations and the lack of permanent, competitive tax policies to promote research and development and capital investment,” said House Majority Whip Tom Emmer. “I want to thank the National Association of Manufacturers and Glenn Metalcraft for providing insight that will guide my work in Congress.”
“Manufacturers across the country are fighting to thrive under the weight of an increasing number of unbalanced and often unfeasible regulations from agencies across the federal government—all amid an uncertain economic environment,” said Glenn Metalcraft President and CEO Joe Glenn. “Glenn Metalcraft would like to thank Whip Emmer and the National Association of Manufacturers for giving us a voice and calling attention to this issue.”
“Manufacturers are struggling to navigate substantial regulations from Washington on top of the deluge of new laws from St. Paul. We appreciate Whip Emmer for expanding our state-level efforts on the national stage,” said Minnesota Chamber President and CEO Doug Loon. “The National Association of Manufacturers is an excellent partner in championing policies for businesses to grow and compete globally. We appreciate their efforts with the Biden administration and Congress to hold agencies accountable and deliver sensible regulations.”
“The barrage of federal regulations from Washington has created serious concern across our industry, with manufacturers reporting that it’s standing in the way of job creation, investment and wage growth. Manufacturers have made it clear that the administration’s regulatory agenda could easily derail manufacturing’s recent success. Glenn Metalcraft and so many others are forced to make tough decisions as agencies issue unbalanced regulations that threaten our sector’s ability to grow and compete,” said NAM President and CEO Jay Timmons. “The positive effects of tax reform, the Bipartisan Infrastructure Law and the CHIPS and Science Act are all being undermined by the growing regulatory burden, and I want to thank Whip Emmer for spotlighting this threat in his home state of Minnesota.”
Background: Recently, the NAM, members of the NAM’s Council of Manufacturing Associations and Conference of State Manufacturers Associations launched Manufacturers for Sensible Regulations, a coalition addressing the impact of the current regulatory onslaught coming from federal agencies.
According to the NAM’s Q2 2023 Manufacturers’ Outlook Survey, more than 63% of manufacturers report spending more than 2,000 hours per year complying with federal regulations, while more than 17% of manufacturers report spending more than 10,000 hours. The NAM survey also highlighted that only 67% of manufacturers are positive about their own company’s outlook, the lowest percentage since Q3 2019. It shows the consequences of regulations: If the regulatory burden on manufacturers decreased, 65% of manufacturers would purchase more capital equipment, and more than 46% would increase compensation.
-NAM-
The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.